Author Topic: How to de-wedge tb  (Read 2960 times)

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
How to de-wedge tb
« on: July 08, 2010, 06:23:28 pm »
Found this and i take no responsibilty in the guide, could be usefull?

http://derby.polog40.co.uk/oldsite/modification/dewedge.html
 

Offline hayesey

  • Administrators
  • *****
  • Posts: 5708
  • The CV joint killer
    • ClubG40
Re: How to de-wedge tb
« Reply #1 on: July 09, 2010, 09:55:29 am »
that was written by me about 7 years ago :)  should still be fine although I did replace the rivets for liquid metal to close the holes off, this works fine but make sure to countersink the holes on both sides (so the liquid metal cures in an hourglass type shape).

Offline dom101

  • Members
  • *****
  • Posts: 41
Re: How to de-wedge tb
« Reply #2 on: July 13, 2011, 12:49:47 am »
just wondering what is the point behind this mod, what does it give, i remmebr a mate telli g me about it befor. cheers

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: How to de-wedge tb
« Reply #3 on: July 15, 2011, 01:42:00 pm »
Lets more air into the engine so it de-ristrict's the inlet.

There is a difference in power, not massive though.