13" alloys over 256 brakes

[Jezza-7]

What size spacers would you need with 13" alloys?

[PeteG40]

fucking big ones!

[Andy]

2"

[Phil]

All depends on the wheel. Quite a few split rims happily fit over 256mm brakes without silly offsets.

[hayesey]

the vast majority of 13" wheels wont fit, not even close.

some will, usually ones aimed at motorsport.   Some compomotive wheels are pretty good for this.

[Yoof]

All depends on the wheel. Quite a few split rims happily fit over 256mm brakes without silly offsets.

Which ones?

[Tav]

I think a compomoive CXR is known for having a lot of brake clearance, would like to get a hold of one to try.

I tried MB mini alloys once and I think they would have fit with a 20mm spacer or a better offset.  Split rim type job.

[Phil]

Off the top of my head, Tramont's fit over 256mm.

As do some Compo's

[Jezza-7]

Just i wouldnt mind getting some 13's to run slicks as 14's are not great size.

May have a look into comp's then.

[Yoof]

Jezza- Try mine this weekend if you want, I've got ET20 and ET0, the latter won't fit with your arches.

Phil- What offset on the tramont? Mathers always used t run spacers, even with 239mm single pot caliper 

[Jezza-7]

Ok mate, that will be good.

Might not be running as i only have the paper part of my license but gonna cal them to see if thats enough.

[Robin]

Jezza when mine shits itself you can borrow my drag slicks to do a few runs!

[Jezza-7]

Haha, cheers Robin. Would like to see what difference they make.

[PR23M3K]

What about BRAID WINRACE A ? I read somewhere that they fit on 262 mm brake caliper (but in Honda) without spacers.

ps. weight of the alloys .... 4,1 kg / pc

[samg40]

Jezza when mine shits itself you can borrow my drag slicks to do a few runs!

Such confidence!