Subframe measurements

[physicsfool]

I am looking for the PPP subframe distance between the 2 sets of ARB block holes.

1. Distance between the holes
2. Distance between the 2 sets of holes
3. Diameter of hole for arb blocks bolts

I am modifying a PPS subframe to make it a bit more stable.

Ta

[hayesey]

aren't these dimensions kind of dictated by the positions of the corresponding holes on the car?  There's not really any adjustment there.

[physicsfool]

Yes, but mine may be distorted due to twisting. The main one is the distance between the two legs as i will probably get a new plate welded to the subframe as the current one has grooves and not holes

[Yoof]

Best bet is to buy a PPP frame... 

Second best bet, fit it to the car, tack the repair sections in (thick washers will work) then remove and weld up.

[physicsfool]

Best bet is to buy a PPP frame... 

Second best bet, fit it to the car, tack the repair sections in (thick washers will work) then remove and weld up.

Do you do a trade in service or maybe student discount. Times are hard for us tax dodging folk

[Yoof]

I'm afraid not 

[physicsfool]

Cheers anyway, will try the putting it in place and tacking a washer on