Club G40 Forum
Technical => Chassis & Braking => Topic started by: physicsfool on August 10, 2015, 02:32:11 pm
-
I am looking for the PPP subframe distance between the 2 sets of ARB block holes.
1. Distance between the holes
2. Distance between the 2 sets of holes
3. Diameter of hole for arb blocks bolts
I am modifying a PPS subframe to make it a bit more stable.
Ta
-
aren't these dimensions kind of dictated by the positions of the corresponding holes on the car? There's not really any adjustment there.
-
Yes, but mine may be distorted due to twisting. The main one is the distance between the two legs as i will probably get a new plate welded to the subframe as the current one has grooves and not holes
-
Best bet is to buy a PPP frame... ;)
Second best bet, fit it to the car, tack the repair sections in (thick washers will work) then remove and weld up.
-
Best bet is to buy a PPP frame... ;)
Second best bet, fit it to the car, tack the repair sections in (thick washers will work) then remove and weld up.
Do you do a trade in service or maybe student discount. Times are hard for us tax dodging folk
-
I'm afraid not :D
-
Cheers anyway, will try the putting it in place and tacking a washer on