All,
We’re now in a position to start gathering numbers for our first batch of adjustable track control arms. These are primarily designed for track use in addition to a stage 3 subframe. This then allows camber and castor adjustment.
The exact camber adjustment will depend entirely on top mount used and current castor angle, I run -3.5° on my car (PPP top mounts), Andy runs -1° on his (standard top mounts) which was corrected from +0.6°
The TCA is adjustable on vehicle, and is secured with two locking nuts (similar to the compression strut on a Stage 3 Subframe), it is supplied with a standard rubber OEM bush- we highly recommend a nylon replacement (which we can supply separately).
As usual the rose joint is a standard off the shelf item, with a rubber boot- all replacement parts found at Rally Design, Demon Tweeks etc, so no expensive repairs- I’m trying to find a supplier for ball joints currently to give a 100% serviceable arm.
Price is circa £200 + postage, dependant on the discount we can get for bulk buy of stock parts.
Please only put your name down if you have cash- and can wait ~8 weeks from point of order for delivery.
Many Thanks,
Pete
e-mail: enquiries@poloperformanceparts.co.uk