I know there shouldnt be but there is. Basically the studs on my downpipe snapped so I had to have my manifold off, so off came the the alternator and the charger. Now before I started the charger belt was tensioned no problem. Took it all apart and put it back together and the belt wouldnt tighten. On the advice of Andy I took the charger off and repositioned the alternator, basically pushing it in a position to make the maximum difference to the tension. Put the belt on and tbh it's never been on so tight. I've had the alternator and charger off a fair few times and never had that issue before, Pete and I were stumped at the time.