Author Topic: fitting for 6psi boost switch  (Read 3451 times)

Offline gaz g40

  • Members
  • *****
  • Posts: 368
fitting for 6psi boost switch
« on: January 11, 2013, 10:29:28 pm »
what fitting have people used to go from the 1/4inch to a vacum line fitting?
thanks

Offline dub-disaster

  • Members
  • *****
  • Posts: 1623
Re: fitting for 6psi boost switch
« Reply #1 on: January 11, 2013, 10:39:34 pm »
assuming your talking about quarter inch bsp then try a 1/4 socket and a 1/4 hose tail of the appropriate size

Offline gaz g40

  • Members
  • *****
  • Posts: 368
Re: fitting for 6psi boost switch
« Reply #2 on: January 11, 2013, 10:41:18 pm »
bin looking over the internet an aint come across anything but ill try searching for that now cheers

Offline josé

  • Members
  • *****
  • Posts: 168
Re: fitting for 6psi boost switch
« Reply #3 on: January 12, 2013, 03:26:59 pm »
this is what i used:-

http://www.ebay.co.uk/itm/1-4-Female-BSP-x-4mm-Plated-Brass-Hose-Tail-Adapter-Next-Day-Delivery-Available-/120890425988?pt=UK_DIY_Material_Nails_Fixing_MJ&hash=item1c25a18284

hopefully the link works if not type this in ebay search box:-120890425988

use some PTFE tape or thread sealant to seal the thread so you don't get a boost leak etc.

josh
« Last Edit: January 12, 2013, 03:28:30 pm by josé »

Offline gaz g40

  • Members
  • *****
  • Posts: 368
Re: fitting for 6psi boost switch
« Reply #4 on: January 13, 2013, 11:41:36 am »
Cheers mate ur the man! Av searched all over ebay lol cheers