Club G40 Forum

Technical => Turbochargers => Topic started by: gaz g40 on January 11, 2013, 10:29:28 pm

Title: fitting for 6psi boost switch
Post by: gaz g40 on January 11, 2013, 10:29:28 pm

what fitting have people used to go from the 1/4inch to a vacum line fitting?
thanks

Title: Re: fitting for 6psi boost switch
Post by: dub-disaster on January 11, 2013, 10:39:34 pm

assuming your talking about quarter inch bsp then try a 1/4 socket and a 1/4 hose tail of the appropriate size

Title: Re: fitting for 6psi boost switch
Post by: gaz g40 on January 11, 2013, 10:41:18 pm

bin looking over the internet an aint come across anything but ill try searching for that now cheers

Title: Re: fitting for 6psi boost switch
Post by: josé on January 12, 2013, 03:26:59 pm

this is what i used:-

http://www.ebay.co.uk/itm/1-4-Female-BSP-x-4mm-Plated-Brass-Hose-Tail-Adapter-Next-Day-Delivery-Available-/120890425988?pt=UK_DIY_Material_Nails_Fixing_MJ&hash=item1c25a18284

hopefully the link works if not type this in ebay search box:-120890425988

use some PTFE tape or thread sealant to seal the thread so you don't get a boost leak etc.

josh

Title: Re: fitting for 6psi boost switch
Post by: gaz g40 on January 13, 2013, 11:41:36 am

Cheers mate ur the man! Av searched all over ebay lol cheers