« previous next »
Pages: [1]   Go Down

Author Topic: Wossner Forged pistons  (Read 7776 times)

Offline Phil

  • Members
  • *****
  • Posts: 395
Wossner Forged pistons
« on: September 26, 2012, 12:03:32 am »
A Forged high performance piston set for the Polo G40. Made by Wossner in material: 4032-T6.

Compression ratio of 8.0:1 is retained

Available in various Bore sizes 75.00: 75.50: 76.00: 77.00mm

77mm giving the 1341cc, 76mm the 1308cc.

£485 delivered



Also available for all other cars.
« Last Edit: December 27, 2014, 06:16:26 pm by Phil »
Logged

Offline randombadger69

  • Members
  • *****
  • Posts: 468
Re: Wossner Forged pistons
« Reply #1 on: September 26, 2012, 12:32:22 am »
Good price! Can you supply a ring-set for 76mm G40 spec?
Logged

Offline Phil

  • Members
  • *****
  • Posts: 395
Re: Wossner Forged pistons
« Reply #2 on: September 26, 2012, 11:17:12 am »
Can do, for Wossners?
Logged

Offline randombadger69

  • Members
  • *****
  • Posts: 468
Re: Wossner Forged pistons
« Reply #3 on: September 26, 2012, 01:16:40 pm »
Yes mate for wossner pistons. May even have the old ring packets kicking about with the code on 760xtz seems to ring bells. Although I did have a problem sourcing them before through pec. There was another type with a slightly different second ring.
« Last Edit: September 26, 2012, 01:25:19 pm by randombadger69 »
Logged

Offline Phil

  • Members
  • *****
  • Posts: 395
Re: Wossner Forged pistons
« Reply #4 on: September 26, 2012, 07:18:05 pm »
Do you know what type you need?
Logged

Offline vee-dub90

  • Members
  • *****
  • Posts: 407
    • Facebook
Re: Wossner Forged pistons
« Reply #5 on: September 26, 2012, 11:44:16 pm »
how much all in for the 77mm?
Logged

Offline randombadger69

  • Members
  • *****
  • Posts: 468
Re: Wossner Forged pistons
« Reply #6 on: September 27, 2012, 10:38:09 am »
I need the standard replacement ringset for their off the shelf 76mm G40 spec pistons. 8.0:1 compression.
Logged

Offline Phil

  • Members
  • *****
  • Posts: 395
Re: Wossner Forged pistons
« Reply #7 on: August 21, 2014, 05:16:12 pm »
Still available.
Logged

Offline dan1300r

  • Members
  • *****
  • Posts: 93
Re: Wossner Forged pistons
« Reply #8 on: September 02, 2014, 08:16:51 am »
Do you have four of these (77mm 1341's) on the shelf? How much these days if so? I have just ordered a set off TSR and I'm going to have to wait up to 6 weeks for Wossner make a set.

I may be able to cancel if they haven't already started..

Thanks Dan
Logged
Pages: [1]   Go Up
« previous next »