I'm searching for a ECU software description  " Datenrahmen"

0 (0%)
0 (0%)

Total Members Voted: 0

Author Topic: ECU Software description  (Read 1454 times)

Offline ansaugtrichtermann

  • Members
  • *****
  • Posts: 1
ECU Software description
« on: November 09, 2008, 05:16:47 pm »
hey folks!
i have an new project...
i will build up my classic mini with an 16V BMWK-head and an digifant ignition/injection system.
therefore i searching for the source code, ore an calibration description for the digifant SW.
do you have any type of an "datenrahmen" or functionality descriptions, where the addresses and the calibration labels are listed?
i need to modify the e.g.idle controller settings, maximum RPM, fuel and ignition mapping...
i have the possibility to read write and modify the EPROM, but special parameters are difficult to find.
thanks in advance for any help!!

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1410
Re: ECU Software description
« Reply #1 on: November 24, 2008, 11:10:50 pm »
contact poloace on link below. he maybe able to help.....