PSD 4 Branch & Exhaust System

AlexG40 · January 29, 2012, 05:27:26 PM

I've got a full PSD 4-2-1 system for sale, comes with all clamps and rubbers.

Prepared to split
£290 for the 4-branch.
£250 for the rest.

£450 for the lot.

O.N.O

Based in Loughborough (Near as damn it)

gaz g40 · January 29, 2012, 07:58:05 PM

is the psd the phase one? as im after an exhaust to clamp onto mine that ive just baught cheers gareth

AlexG40 · January 29, 2012, 08:25:47 PM

I believe this is one of the very first systems they did with the 4 branch. It has a two pipe joint with the Manifold.

si polo coupe · January 29, 2012, 08:40:42 PM

Have you any pics

Insight G40 · January 29, 2012, 08:41:46 PM

Gareth, your manifold was mated to a PSD exhaust so this will fit.

xrrich · January 29, 2012, 08:50:34 PM

interested in the exhaust what is the inside and outside diameter

AlexG40 · January 29, 2012, 08:56:12 PM

Quote from: XRrich on January 29, 2012, 08:50:34 PM
interested in the exhaust what is the inside and outside diameter

I'll have to put a vernier on it mate, it's around 3" with one box at the back. It's pretty loud.

AlexG40 · January 29, 2012, 09:03:44 PM

Old pics, but all I have for now. The manifold now has colouring from heat and the exhaust has marks on the bottom side from contact with the floor. Nothing critical and the back box and tail pipe still shine up good as new.

Insight G40 · January 29, 2012, 09:11:16 PM

PSD only did one size of exhaust, 63mm, can't remember if that's internal or external though.

gaz g40 · January 31, 2012, 10:38:51 PM

Cheers rob fot the info am having it off him off on sunday

AlexG40 · February 04, 2012, 06:40:19 PM

Sold now. Thanks lads. Nice to meet you, hope you got home ok!