Author Topic: Uprated Driveshaft V2 Single orders accepted 2019  (Read 29528 times)

Offline Karlos the jackyl

  • Members
  • *****
  • Posts: 381
    • VW Polo
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #90 on: December 29, 2018, 11:32:10 am »
I'll investigate this again in the new year

Offline dazzle53

  • Members
  • *****
  • Posts: 163
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #91 on: December 30, 2018, 10:09:18 am »
Brilliant. Looking forward to an update.

Offline vwmk3jon

  • Members
  • *****
  • Posts: 1423
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #92 on: January 03, 2019, 09:02:12 pm »
Me too.

Offline Karlos the jackyl

  • Members
  • *****
  • Posts: 381
    • VW Polo
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #93 on: January 04, 2019, 11:03:58 am »
Does anyone have a stock driveshaft spare that I can loan / borrow to use for the tooling... I thought I had a spare but I think it got binned. Im in Hertfordshire if anyone is local.

Thanks

Offline dazzle53

  • Members
  • *****
  • Posts: 163
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #94 on: January 04, 2019, 01:37:19 pm »
Not sure if I do but I will have a check and see and get back to you.

Offline Karlos the jackyl

  • Members
  • *****
  • Posts: 381
    • VW Polo
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #95 on: January 09, 2019, 09:19:15 am »
Not sure if I do but I will have a check and see and get back to you.

Thanks , I've sorted one now

Offline RyanC

  • Members
  • *****
  • Posts: 367
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #96 on: January 27, 2019, 11:01:28 am »
A little feed back on the shafts. Work prefect for me but I did add a stop to each end so you could use the concave washers to stop the joint moving on the shaft. Mine had a lot of movement before and actually produced a noise due to the inner cerclip knocking against the joint over bumps where it was able to float on the spline. But nothing a few hours couldn’t fix though  🙂

Offline Karlos the jackyl

  • Members
  • *****
  • Posts: 381
    • VW Polo
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #97 on: April 18, 2019, 12:47:45 pm »
They are back by! Uprated Heavy Duty Racing Driveshaft!!

Running a high powered Polo? Its only a matter of time before you snap a driveshaft!

Volkswagen Polo Heavy Duty Racing Driveshaft Fits Volkswagen Polo  MK1 - Mk2 - MK3 - 86 - 86c - Mk2f from 1975 - 1993

This heavy duty driveshaft is designed for the fast street or race drag Volkswagen

We released the original driveshaft design in 2001 to overcome the breakages experienced when slick tyres / Limited  Slip Differentials are used with the standard polo driveshaft. Since then it has been proven to be the choice of drivetrain to deliver reliable high performance results for both fast road and track racing around the world for 18 years!
This unit is manufactured from a single piece of high-grade aircraft quality material and heat cycled to provide a durable tough finish (blue flame glazing).
The driveshaft is compatible with all of the standard polo components and requires no modifications to fit.

These are currently in stock and can be purchased using Paypal by heading to  over to

https://www.mk1polo.com/

Priced at £199.95 with free speedy delivery to anywhere in the UK!!

Use the code : GLADER at the checkout you will recieve an EXTRA  £5 off !

Any questions feel free to contact me

Regards
Karl Tull

Offline Karlos the jackyl

  • Members
  • *****
  • Posts: 381
    • VW Polo
Re: Uprated Driveshaft Single orders accepted 2013
« Reply #98 on: April 20, 2019, 10:22:51 am »
A little feed back on the shafts. Work prefect for me but I did add a stop to each end so you could use the concave washers to stop the joint moving on the shaft. Mine had a lot of movement before and actually produced a noise due to the inner cerclip knocking against the joint over bumps where it was able to float on the spline. But nothing a few hours couldn’t fix though  🙂


Thanks Ryan
The lastest v2 design uses the stock seat on an end and is working well.

Regards