Author Topic: G40 from Bavaria  (Read 12478 times)

Offline ChrisG

  • Members
  • *****
  • Posts: 10
G40 from Bavaria
« on: April 14, 2011, 10:14:10 am »
Hi all,

my Name is Chris. I`m 50 years old and live in Regensburg / Bavaria / Germany. I`m a G40 Fan since 1989 cause I could test one of the first limited G40. So I licked blood and at the 19.04.1991 I got my first G40 which I own until today.

Meanwhile I have 3 G40 in my garage. One stock model - unfortunately with a crash, then my first G40 as a Slalom race car and a 16V G40 for hillclimb. The last two with G60 superchargers. So the 8 valve has 218hp and the 16V among 280hp.

I started motorsports in 1992 and finished in 2002. After a break of about 8 years I started again - the virus is deep iside of me. Since last year my son owns his driving licence and so father and son are "racing in the streets" (as Bruce sings..).

Here some pics of the G40

Nice to be here

Chris

Offline hayesey

  • Administrators
  • *****
  • Posts: 5824
  • The CV joint killer
    • ClubG40
Re: G40 from Bavaria
« Reply #1 on: April 14, 2011, 11:16:10 am »
willkommen!

I think your orange car is quite well known even in the UK.  Very impressive car, any videos of it in action?

I also like the staggered wheel track on the black one (by that I mean wider track width at the front).  Have this on mine too only no where near as much!

Offline Yoof

  • Traders
  • *****
  • Posts: 2355
  • I know naathing..
    • Polo Performance Parts
Re: G40 from Bavaria
« Reply #2 on: April 14, 2011, 12:32:12 pm »
Excellent cars- I've had pictures of both of these for years, and they've always been a source of inspiration!

What gearbox do you use, I presume 6-speed sequential, Sadev?

Pete

Offline ChrisG

  • Members
  • *****
  • Posts: 10
Re: G40 from Bavaria
« Reply #3 on: April 14, 2011, 01:10:14 pm »
Excellent cars- I've had pictures of both of these for years, and they've always been a source of inspiration!

What gearbox do you use, I presume 6-speed sequential, Sadev?

Pete

Hi Pete,

thank`s a lot for your feedback. Didn`t think that there would have been some information about this car in GB. That`s a Golf 02A Gearbox modifies as a dogbox. The gear wheels were made by Kerschbaumer in Germany. 6-speed with H, no sequential shift. So I had to use a 20mm Aluminium plate to connect engine and gearbox - and by the way I had to veer the engine among 20° to the front. This was very tricky because many things have to be changed (engine mounts, oil pan, exhaust system......) For that the generator had to move from the front of the engine to the backside......


Quite a very looooong story....


Christian

Offline ChrisG

  • Members
  • *****
  • Posts: 10
Re: G40 from Bavaria
« Reply #4 on: April 14, 2011, 01:22:53 pm »
willkommen!

I think your orange car is quite well known even in the UK.  Very impressive car, any videos of it in action?

I also like the staggered wheel track on the black one (by that I mean wider track width at the front).  Have this on mine too only no where near as much!

Hi Hayesey,

thank you for comment and the "willkommen"! From the 8V Polo there are some videos avaliable - look for u-tube Bergrennen St. Agatha or iberg Gruppe H Berg Cup(unfortunately I don`t have the link avaliable at the moment)


The wider track results of 9" wheels at the front. The plastic parts are from the same mold as the 16V hillclimb Polo - even a little bit smaller. The 16V has 10,5" wheels at the front. Both have wishbones at the front axle. The 16V wb is longer than the wb of the 8V.


The mold is quite simple - it`s made as a cone. I laminate this parts by myselve.


Christian

Offline Puncharado

  • Members
  • *****
  • Posts: 446
  • Back on the road in 2010! No, 2011! Maybe.
Re: G40 from Bavaria
« Reply #5 on: April 14, 2011, 08:44:22 pm »
Hello Chris, some serious machinery there, very impressive.

Offline cheddarcheese

  • Members
  • *****
  • Posts: 553
  • i like boobs!
    • supercharged
Re: G40 from Bavaria
« Reply #6 on: April 14, 2011, 08:54:27 pm »
wow i have seen your pictures around and the videos of your polo's and have searched plenty of times for some info on them as they are a major influence on how i want my g40.

thanks for joining our forum and sharing some info.

please post as many pictures of your builds and info as you like as it would help lots.

especially pictures of the front wishbone and suspension setups on the car   ;D ;D ;D
« Last Edit: April 14, 2011, 08:58:50 pm by cheddarcheese »

Offline ChrisG

  • Members
  • *****
  • Posts: 10
Re: G40 from Bavaria
« Reply #7 on: April 15, 2011, 08:41:11 am »
Here some further pics

Chris

Offline Ä‘uro

  • Members
  • *****
  • Posts: 281
Re: G40 from Bavaria
« Reply #8 on: April 15, 2011, 08:51:02 am »
Guten Tag Chris,

Willkommen im G40 forum. deine autos sehen sehr gut aus.  ;D little bit of my german knowledge.

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: G40 from Bavaria
« Reply #9 on: April 15, 2011, 10:52:34 am »
Welcome. Very impressive car you have.

The wishbones that you made are interesting too. I wonder if it would be better than a subframe?

Some good power your putting out on the 16v, what was the engine from?

Offline hayesey

  • Administrators
  • *****
  • Posts: 5824
  • The CV joint killer
    • ClubG40
Re: G40 from Bavaria
« Reply #10 on: April 15, 2011, 12:41:00 pm »
not as good as a subframe surely, as they aren't stiffening the front end up in the same way.  Interesting though...

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: G40 from Bavaria
« Reply #11 on: April 15, 2011, 12:54:21 pm »
Oh yeah i see what you mean. Would be good if you could make them wishbones onto a subframe.

Offline hayesey

  • Administrators
  • *****
  • Posts: 5824
  • The CV joint killer
    • ClubG40
Re: G40 from Bavaria
« Reply #12 on: April 15, 2011, 01:25:12 pm »
then it would just be a stage 3 PPP frame though?

Offline Tonyxxx86c

  • Members
  • *****
  • Posts: 45
Re: G40 from Bavaria
« Reply #13 on: April 15, 2011, 01:53:26 pm »
Hello Chris

some serious machinery there, very impressive.


Offline Varley

  • Members
  • *****
  • Posts: 176
Re: G40 from Bavaria
« Reply #14 on: April 15, 2011, 05:00:02 pm »
WOW!  :o

Welcome to the forum, some serious kit going on there!

Are they both still 1272cc or have you increased the bore and/or stroke?