toothed pulleys

[boyzey]

hiya people just after some advice reli,
i am afta a set of 65mm toothed pulleys now and i hear PSD are the best. because ther lighter than german ebay ones, just correct me wen im rong please haha i dont no much about them you see, just want to no wat set will fit and work the best haha.

and if any one is selling any please let me no im interseted cheers boyzey

[Jezza-7]

http://cgi.ebay.co.uk/VW-Polo-G40-PSD-Supercharger-Toothed-Pullies-lader-65mm_W0QQitemZ320484043086QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4a9e56694e

Here are mate brand new too. Expect to pay £200+ as they are new. I reckon these will go for £250-£300 as 2nd hand ones go for around £200.

These will fit fine but ideally you need something i cant remember what it is called on the alternator pulley to prevent the belt come off.

They are the best really and very hard to get hold. I cant think that there are many that were made and are still around as the phase 1's wear quicker.

[Jezza-7]

Ah you need provision guides for the alternator pulley.

[Justin14100]

What you could do is buy some pulleys from RS components and get someone to machine them down for you. Think I made myself a set for about £50

[boyzey]

cheers jezza 7 they look good and yes it says on these that ther is the holes for the guides on the altinator pulley. does that mean you can just buy some guides from some wer or is it a case of make your own?

and justin i dont think id no wich pulley to start with and wer to go from there lol, but its a option cheers

[Jezza-7]

I dont know if you canj ust buy them, they usually come with them already on. I was looking at buying some a little while ago and that already had the guide on it so i dont know what the seller has done with them. You could always get the kit and then get some really big washers and get it made to fit and cut to size. Unless anyone knows if you can get hold of them elsewhere?

[Daryl]

Has anyone tryed RPM Tuning toothed belt kits?

[Jezza-7]

Are they the micro vee belt kit?

Or the ones that say they arent available?

[Daryl]

the ones that are not available well was last time i looked. What i would like to know is whats is wrong with the german ones and why everone goes for the psd toothed belt kits as im going to looking to get a set in a few months time. The only germen kits i would not get is the steel ones.

Cheers Daryl

[PeteG40]

most if not all german ones i've seen are steel... hence why people like psd ones, lighter!

[Jezza-7]

Yeah that is right pete. The only ally ones you can get are on rpm but it says the currently not available. I emailed them months ago and never got a reply. Only ally ones i know that are easy to get hold of is micro vee kits but there not toothed, altough is still allows the charger to slip and wont do damage if it you hit the rev limit.

[Jezza-7]

Right these sold for £215 in the end which was good. Does anybody knowthe seller. His name is juan and was wondering if this is the same fella who used to be off here?

[LeonL]

Right these sold for £215 in the end which was good. Does anybody knowthe seller. His name is juan and was wondering if this is the same fella who used to be off here?

its same guy who got banned, yes

[Jezza-7]

Ah thouht so, was checking.

[benh999]

its same guy who got banned, yes

Why was he banned?