G40 Eaton charger kit, injector jackets, non standard intercooler

[Oily Fingers]

Got my eaton charger kit now up for sael.

come with PSD camshaft, PSD chip, PSD bottom pulley, new belt, toothed pulley for the alternator, tensioner pulley, charger and engine mount bracket, some boost piping, and tappets for the cylinder head.

I have never had this running, but was told by the previous owner that it pulling hard and well.

any more questions, please feel free to ask.

Would like collection from great Yarmouth. (I am away Friday till sunday, but can answer emails best I can and someone will be at home for collection)

£400 collected
















Set of injector jackets, good condition.

£20 posted



Uprated intercooler, off the top of my head the measurements are 65mm deep x 550mm wide.

£50 collected £60 posted

[z3i]

How much boost does the eaton kick out?

[Tav]

Not any entirely relevant question without knowing spec. of car it is on and where the boost gauge is located.

Not 100% sure on below values but best I can find:

G40: 566ccm³ per rotation
Eaton: 737ccm³ per rotation

G40: 10,000-13,000 RPM depending on pulley
Eaton: 14,000 RPM

So you can see Eaton can pump more volume per rotation and also can handle more RPM.  So without looking into efficiency and other factors you can see the Eaton figures look like it's capable of pumping a lot more air...

[z3i]

Thanks for that, was a good answer to my poor question lol
I was comparing to a turbo, I don't think eaton will be ebough for my application
Thanks though

[GR40]

I dont know if it helps at all but I have a stock engine with an eaton with standar pulley, 6n pullies for crank and alternator and I am seeing 1,2bar at rev limit. With standar ecu chip I was dynoed at 143hp at the crank.

[Oily Fingers]

Bump

[Oily Fingers]

Need this lot out the way, will be going on eBay very shortly, quick listings.

[z3i]

Hold on mate, I'm after that eaton kit, is there anything your looking for on your G? I don't have the money right this second but plenty of parts I need to sell!

[z3i]

In a few weeks I will have a glader, 1341 forged bottom end, 65 mm toothies, ported head for sale

[Oily Fingers]

don't need anything, I'm getting rid of everything ive got to do with my g40.

the sooner the better really, as I'm free to sort things out till next thrusday (away in London) then the week after I might be offshore for work so cant sort anything then

[z3i]

Ah dammit, hmm bare with me, I'll have a think I'm in Wales this week
Can't get anything sold off the car till I get back

[Oily Fingers]

Deposit taken on eaton kit

Open to offers on other parts

[Oily Fingers]

Back up for sale

[Oily Fingers]

eaton kit sold

[Alex]

Do you still have the injector jackets?