wat chip is this ?

[tadpole1987]

hi peeps just inspectin my ecu and can anyone tell wat this chip is this is wat it says on it

G40003
Adam Brookes
s/n:00000091

[physicsfool]

Map #G40003-1272cc chip- for owners who are reaching the limits of standard injectors. This map allows larger 250cc/min units to be installed- as recommended for 165bhp+ Recommended modifications are; ported supercharger, 65mm Pulley, larger intercooler, colder spark plugs.

[tadpole1987]

hi mate oh right i think somthings majorly wrong with my g coz its ment to have r1 jabba charger its got a bigger intercooler g60 injectors g60 pulleys and boost return mod but it really doesent go very good my mates standard g has got 65 mm pulleys and it will piss all over mine

[JoeH]

I don't think G40's run G60 pulleys, so that would be wrong to start with...

[physicsfool]

What size is you pulley? Are the v belts properly tensioned? Also does it idle smoothly?

[Andy]

Check what injectors you've got too.

[z3i]

Check what injectors you've got too.

Yeah we've seen that one before.... Lol

[tadpole1987]

The car does idle but not the best. I'm gonna take injectors out and pulleys to see way they are I bought the car 6months ago as soon as I drove it I New something wasn't right. Iv had the alternator and the pulley is a lot smaller than my mate's 65mm psd pulley

[PeteG40]

you sure the charger is healthy?  no boost leaks?

[tadpole1987]

Hi Pete I check every day for air leaks and seems to be fine charger is running just over a bar of pressure but sometimes drops under a bar iv got a stage 2 charger to go on when iv rebuilt it