mk2 Polo G40 Engine

[Etches]

Ended up being a tit and crashing the mrs lupo so her polo needed to be running, chucked the 1lt back in and now selling the bits off the engine she has.

The engine is at her parents( Bolsover S44 6EN)  so I will have to take orders then on weekends collect parts / meet up for collection.


1992 Polo G40 full engine, ancillaries and gearbox with 86k taken from front impact damaged car. Its been sat a while but it turns freely and has been under cover.

Motor is a PY

Schrick cam

GT inlet with G60 injectors

Stainless manifold (unknown origin but is G40 bore)

BMW 320d intercooler

G60 Intercooler

G40 wiring loom


Remote oil cooler..but lines have been crushed!! New lines are around 40 quid to be made up.

R1 spec charger

G40 gearbox.

Charger has a hole in the front the boost return side. Got this checked by PeteG40 a while back internals are fine just needs a matching side casing which I will provide but it needs porting (an hours work from jabba £60)
.


I will chuck the prices on later when I get home

[youngprodigys]

what spec is the camshaft mate? 268??? im interested if it is! and how much for the loom mate?

KiZ

[Etches]

I think its a 272 Kiz, if it doesnt go sharpish as a lot ill let you know about the loom

The G40 engine will either go for 950 all in, or

G40 head - 100 ( 240 with shrick 272 cam)

Shrick cam - 150

G40 bottom end - 200

GT inlet - 50

G60 injectors - 80

G40 Loom - 80

G40 R1 Charger with spare casing  - 200

65mm Pulley set - 50 with belts

G40 Stainless manifold - 100

G40 ecu - 100 (chip to suit all other mods can be supplied for extra cost)

G40 gearbox - 250

All the other bits for the conversion are there too

[z3i]

when was the charger last serviced?

[Etches]

It needs a service pal, last one is stamped on the casin a while back i think

[Etches]

Heading up to Bolsover at the weekend people if anyones interested in the lot

[bozzi]

pmed

[Etches]

There is enough interest to split the thing now so get your pms in and I can take deposits for the collection items and get the rest in the post monday morning

[Etches]

Head with Shrick Cam

Gt Inlet

G60 Injectors

Provisionally sold

[Oily Fingers]

pm'd

[Etches]

Head cam and g60 injectors sold
pics

[Yoof]

Tom- Please could you give me a price (posted) for the boost pipe BRV to throttle body.

Thanks,

Pete

[Etches]

pm'd

[Etches]

G40 engine loom sold, interior loom still available

[Etches]

boost pipe BRV to throttle body sold and dispatched.

loads of parts still available