Clutch bolts- what size?

[ereeiz]

I'm sticking the engine back in my 6n2 (only took a year!) but have lost the bolts to hold the clutch onto the flywheel, They look about M6 but every M6 I tried seemed too small and an M8 was too large, so either I was using M5's or it's an M7 hole?

It's the 1.4 16v annoying twin cambelt engine (75BHP?) W reg.

Anyone got any in my area (Worcester/Gloucester by the end of the M50), or know what size they are so I can go get some first thing (I want to MOT it tomorrow!). I know it's not a G40 but VW normally use the same bolts for stuff, so at worst if someone told me the dimensions for a G I'd go get some of them. Really pissed off as I had to do two trips to the motor factors to get the clutch, then take it back and get another as it had the wrong thrust bearing They probably have some anyway but I thought I'd ask on here in case they don't and I can go somewhere else to buy them off the shelf.

Thankin Ye!

[pettsy]

according my Etka

M7 x 14 "12 point head bolt"
Part No N90320701

[ereeiz]

Cheers pal! I'll see if I can get some tomorrow.

Funny, they are M7. There was me thinking I was wrong with my guesstimations too 

Gonna Try GSF first thing I reckon!

[ereeiz]

For future reference; They were the correct bolts and GSF don't sell them, had to go to the Audi dealers in Worcester instead, cost approx 40p each.