Parts & seals for re-fitting head

[Jezza-7]

I have a list of parts and seals etc that im looking at buying for when my head goes on. The head has been skimmed and im going to stick with a VAG for all the parts, unless they dont have them or if there are any recomendations for other companys to use?

If there is anything i have missed out or you reckon its worth replacing while the heads off, please let me know.

For the cam:

Camshaft Bolt & washer, N 90256201, 027 109 143
New tappets (INA)
Timing end and dizzy end seals (3 of them)  030103085A, 030905261, 030905224
Rocker gasket  030103483C

Head:

Head bolts x 10 030103384 & washers, no part number on vagcat for washers for PY
Head Gasket      030103383R
Exhaust gaskets x 2  030 253 039A
Inlet gasket  030129717D
Throttle body gasket  030133073A
Inlet manifold bolts x 6 N 0447311, washers x 8 N 01155811, 2 nuts N 01100830
Throttle body bolts x 4 N 0147053 & 4 spring washer  N 0122265
Bearing cap nuts x 10 N 10045301
Possibly thermostat housing 030121117M
Thermostat  030121113
Thermostat housing seal 030121119
Temp sensor 025906041A
Temp sender 251919501D
Connection socket 030121121B & seal 038121119B
Housing bolts x 2 N 0103324 & 2 spring washer N 0122293
Exhaust studs x 8 N 044 410 4, washers x8 N 011 558 11 & nuts x8 N 900 850 01
New plugs  GSF or ECP
Timing belt  030 109 119A

Windage tray:

2 sump seals 032103609B
Longer bolts loads of

All i can think of for now.

Head has done 60k

[Jezza-7]

Possibly this metal head gasket?

http://cgi.ebay.co.uk/Decompression-Plate-Polo-Golf-G40-turbo-Compressor-NEW-/260558728818?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3caa82ae72

[Puncharado]

New valve guides perhaps?

[Jezza-7]

I think they were replaced when the head was rebuilt/ ported/ big valved.

[Jezza-7]

Is it worth getting this instead of vag head gasket?

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260558728818&ssPageName=STRK:MEWAX:IT

My head has been skimmed once as well.

[hayesey]

That's a decompression plate for lowering compression ratio, not a head gasket.

[Jezza-7]

Ah...

I think i will just stay standard vag parts.