estimated power for spec

grayg40 · December 14, 2009, 12:43:57 PM

Just wandering what the estimated power would be for the engine spec of my G?
spec-
full blend charger
65mm pully
induction kit with sheild
G60 injectors
GT inlet
and chip to suit
ss exhaust (not sure on bore size but bigger than std)

I will get it RR ed next year when she comes back on the road in may, possibly with a little more mods.

wozzaG40 · December 14, 2009, 01:36:17 PM

anywhere between 145-160bhp dependant on the condition of your engine/charger and the chip you are running.

minus the injectors, the GT inlet and using a generic chip i wass making 140bhp without my induction kit on.

vwmk3jon · December 14, 2009, 01:43:16 PM

Mine was the same spec minus the injectors and it was RR @ 137bhp but I had a silly boost leak so the above sounds good to me.

wozzaG40 · December 14, 2009, 01:48:01 PM

ah yes i rememeber john, that was funny you were so upset that i made more than you. tough times, when i got home i realised that the boost pipe to the intercooler had come off, not sure if it happened on the way home or not though.

vwmk3jon · December 14, 2009, 01:54:28 PM

I was more concerned about getting it home in one piece I'll have you know

I won the flame contest though. More overrun planned for next time and I'd have had you if I'd spotted the knackered top boost pipe

djtez · December 16, 2009, 11:01:00 PM

same kinda question please..

standard bottom end
ported cyl head + throttle + dewedged
ported gt inlet with g60 inj
psd toothies 65mm pulley {r1 charger}
sns stage 5 chip.
psd full 1 silencer system incld manifold.
cosworth fmic
57ikit with samco feed and jabba heatsheild
Oh an piper fast road cam

anyon with similar hd a rr??

polo classic · December 18, 2009, 03:34:51 PM

I did 168 on mine @the limiter@6977, but mine is overcammed, custom Newman 264/270 with a few degrees too little LS

wozzaG40 · December 18, 2009, 03:52:43 PM

without the cylinder head porting or cam my friends ran 161bhp with a rebuilt standard bottom end, with a custom chip to suit mods. If you got the car mapped and had a healthy engine 160-170 wouldnt being pushing it too much for an estimate

djtez · December 18, 2009, 07:36:09 PM

i really hve high hopes but its standard untouched 96k bottom end.
illbe on look out next year for 1341bottom end with bvh
i'd really like 180 bhp !!
but would be happy with 160 ;o !
but it needs timimg done and set up proper ?

wozzaG40 · December 21, 2009, 11:09:29 AM

im sure PPP could help you out with setting the engine up for optimum power mate

djtez · December 21, 2009, 12:41:14 PM

only thing is im in fife up scotland, so its not like a nip roond the corner too check the health of it..
dont think theres anyone local to me infact!

wozzaG40 · December 22, 2009, 07:56:09 AM

Ah right i see, well that is slightly tricky, holiday maybe :-)

grayg40 · December 22, 2009, 10:10:27 AM

Quote from: djtez on December 21, 2009, 12:41:14 PM
only thing is im in fife up scotland, so its not like a nip roond the corner too check the health of it..
dont think theres anyone local to me infact!

am in the north east, is Star performance not still around in Fife somewhere? they used to do alot o dubs inc G's.

grayg40 · December 22, 2009, 10:14:57 AM

google Star performance. they are still there

djtez · December 22, 2009, 01:43:42 PM

i know star, i know jim curley who owns it, last time i went down he didn't wanna touch it because it was tooo modified? not the kinda custome he wants he said..
mostly does diesel tuning now.
i might invest in buying a timing light..

anyone knowwhere a can get the how to do your timimg from?
e.g unplug blue temp and certain things..