fitting standalone oil tank

[Jezza-7]

Any recomendations on using this oil by redline?

Its the 10WT

http://www.redlineoil-europe.com/motoroil/index.asp?section=Synthetic+Racing+Oils_00009

[scotsjohn]

That's what I'm using by the looks of it. All seems OK for me . The short life they're stating's more than likely for stresses in con-rod bearings knocking the shit out of it. Your charger's not got that problem; rollers/tapered rollers? don't have the same lube problems.

[Jezza-7]

Hayesey, when you say about the bolt to block the return something like this would be ok?

http://cgi.ebay.co.uk/Brake-pipe-ends-m10-x-1mm-thread-male-10-pack_W0QQitemZ110487373443QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item19b98f8683

[hayesey]

well they wont do because they are brake pipe unions so have holes through them.  Although I've used one of them filled with solder by heating it with a blow torch before.

[Tommo]

Im guessing you could just use a bolt with the correct thread and a copper washer?

[Jezza-7]

Ok i will try find the right threaded bolt or try your idea. I think i might have some at work. Will take my thread gauge tomorrow.

[hayesey]

yeah just any m10x1 bolt with a copper washer will be reet