To follow on from...
http://www.polog40.co.uk/forum/index.php/topic,443.0.html
I've changed shell and doing it all again. Missed the old green one, which was so easy to drive.
And found this pictures of an old polo..
(http://img.photobucket.com/albums/v609/philj/Picture0333-1.jpg)
So got a nice low mileage 1.0L, and picked up a few bits.
(http://img.photobucket.com/albums/v609/philj/Parade%202/181020080011.jpg)
(http://img.photobucket.com/albums/v609/philj/Parade%202/181020088.jpg)
Stock.
First port of call was to stick a G lader to the 1.0L ;D
http://www.polog40.co.uk/forum/index.php/topic,732.0.html
(http://img.photobucket.com/albums/v609/philj/141020080277.jpg)
Got some nice suspension...
(http://img.photobucket.com/albums/v609/philj/Parade%202/28102008060000.jpg)
And got my friend Mr Airgun. Got the lot off in half hour of minmial effort. ;D
(http://img.photobucket.com/albums/v609/philj/Parade%202/28102008057.jpg)
Lumps out, slowly building up the new one.
(http://img.photobucket.com/albums/v609/philj/231020080511.jpg)
Wedging that in there, and after blowing 4 chargers I've given in and going turbo.
Picked up Cup car diff as well.
Fitted the cooler...
(http://img.photobucket.com/albums/v609/philj/Parade%202/0411200807333.jpg)
(http://img.photobucket.com/albums/v609/philj/Parade%202/0411200807555.jpg)
(http://img.photobucket.com/albums/v609/philj/Parade%202/04112008076666.jpg)
Gonna paint the lower mount tomorrow.
Nice work mate... I'm thinking me too to put an FMIC, but myonly question is: I have to take the plastick frame (of the water cooler) off? If i do that the air it's going to escape from the water coolers cells? So the water temp is going to increased?
Sorry for my poor English...
I just took it off. Did the same on the caged one and it was fine...
Started on the engine yesterday.
(http://img.photobucket.com/albums/v609/philj/Parade%202/091220082077.jpg)
(http://img.photobucket.com/albums/v609/philj/Parade%202/101220082155.jpg)
Should be back together tomorrow...
(http://img.photobucket.com/albums/v609/philj/Parade%202/1012200821888.jpg)
Suspension should of been on, but can anyone spot whats wrong with this pic?
(http://img.photobucket.com/albums/v609/philj/Parade%202/28102008060000.jpg)
The list... :lol:
(http://img.photobucket.com/albums/v609/philj/Parade%202/101220082144444.jpg)
Waiting on some powder coated bits to put it back together.
(http://img.photobucket.com/albums/v609/philj/Parade%202/12122008221111.jpg)
Greeeeeeeeeeen
(http://img.photobucket.com/albums/v609/philj/Parade%202/12122008223.jpg)
Got the first batch of powder coated bits back.
(http://img.photobucket.com/albums/v609/philj/Parade%202/15122008231111.jpg)
Might get on and finish it tomorrow.
(http://img.photobucket.com/albums/v609/philj/Parade%202/15122008232222.jpg)
Nah not the same side.
K03 for the moment, 1341, ported head and inlet, 51mm, front mount above, and put this in today.
(http://img.photobucket.com/albums/v609/philj/Parade%202/1612200823333.jpg)
Couldnt find my stainless gearbox bolts all day :lol:
(http://img.photobucket.com/albums/v609/philj/Parade%202/1612200823666.jpg)
(http://img.photobucket.com/albums/v609/philj/Parade%202/1612200823777.jpg)
Almost tempted to have another go with the G lader andput the turbo on something else...
(http://img.photobucket.com/albums/v609/philj/1711200814555.jpg)
Haven't really done much recently, laquered the starter motor..
(http://img.photobucket.com/albums/v609/philj/Parade%202/171220082388.jpg)
And painted a couple more bits, then changed my mind :lol:
(http://img.photobucket.com/albums/v609/philj/Parade%202/2012200824444.jpg)
(http://img.photobucket.com/albums/v609/philj/Parade%202/21122008250000.jpg)