Club G40 Forum

Club G40 => Photos and videos => Ongoing Projects => Topic started by: Phil on October 29, 2008, 01:43:36 am

Title: And again
Post by: Phil on October 29, 2008, 01:43:36 am

To follow on from...

http://www.polog40.co.uk/forum/index.php/topic,443.0.html

I've changed shell and doing it all again. Missed the old green one, which was so easy to drive.

And found this pictures of an old polo..

(http://img.photobucket.com/albums/v609/philj/Picture0333-1.jpg)

So got a nice low mileage 1.0L, and picked up a few bits.

(http://img.photobucket.com/albums/v609/philj/Parade%202/181020080011.jpg)

(http://img.photobucket.com/albums/v609/philj/Parade%202/181020088.jpg)

Stock.

First port of call was to stick a G lader to the 1.0L  ;D

http://www.polog40.co.uk/forum/index.php/topic,732.0.html

(http://img.photobucket.com/albums/v609/philj/141020080277.jpg)

Title: Re: And again
Post by: Phil on October 29, 2008, 01:47:29 am

Got some nice suspension...

(http://img.photobucket.com/albums/v609/philj/Parade%202/28102008060000.jpg)

And got my friend Mr Airgun. Got the lot off in half hour of minmial effort. ;D

(http://img.photobucket.com/albums/v609/philj/Parade%202/28102008057.jpg)

Lumps out, slowly building up the new one.

(http://img.photobucket.com/albums/v609/philj/231020080511.jpg)

Wedging that in there, and after blowing 4 chargers I've given in and going turbo.

Picked up Cup car diff as well.

Title: Re: And again
Post by: Phil on November 04, 2008, 05:29:13 pm

Fitted the cooler...

(http://img.photobucket.com/albums/v609/philj/Parade%202/0411200807333.jpg)

(http://img.photobucket.com/albums/v609/philj/Parade%202/0411200807555.jpg)

(http://img.photobucket.com/albums/v609/philj/Parade%202/04112008076666.jpg)

Gonna paint the lower mount tomorrow.

Title: Re: And again
Post by: Alexiskayak_7 on November 04, 2008, 07:16:15 pm

Nice work mate... I'm thinking me too to put an FMIC, but myonly question is: I have to take the  plastick frame (of the water cooler) off? If i do that the air it's going to escape from the water coolers cells? So the water temp is going to increased?
                                                                          Sorry for my poor English...

Title: Re: And again
Post by: Phil on November 26, 2008, 01:05:46 am

I just took it off. Did the same on the caged one and it was fine...

Title: Re: And again
Post by: Phil on December 18, 2008, 02:41:57 am

Started on the engine yesterday.

(http://img.photobucket.com/albums/v609/philj/Parade%202/091220082077.jpg)

(http://img.photobucket.com/albums/v609/philj/Parade%202/101220082155.jpg)

Should be back together tomorrow...

(http://img.photobucket.com/albums/v609/philj/Parade%202/1012200821888.jpg)

Suspension should of been on, but can anyone spot whats wrong with this pic?

(http://img.photobucket.com/albums/v609/philj/Parade%202/28102008060000.jpg)


The list... :lol:

(http://img.photobucket.com/albums/v609/philj/Parade%202/101220082144444.jpg)

Title: Re: And again
Post by: Phil on December 18, 2008, 02:42:59 am

Waiting on some powder coated bits to put it back together.

(http://img.photobucket.com/albums/v609/philj/Parade%202/12122008221111.jpg)

Greeeeeeeeeeen

(http://img.photobucket.com/albums/v609/philj/Parade%202/12122008223.jpg)

Got the first batch of powder coated bits back.

(http://img.photobucket.com/albums/v609/philj/Parade%202/15122008231111.jpg)

Might get on and finish it tomorrow.

(http://img.photobucket.com/albums/v609/philj/Parade%202/15122008232222.jpg)

Nah not the same side.

K03 for the moment, 1341, ported head and inlet, 51mm, front mount above, and put this in today.

(http://img.photobucket.com/albums/v609/philj/Parade%202/1612200823333.jpg)

Couldnt find my stainless gearbox bolts all day :lol:

(http://img.photobucket.com/albums/v609/philj/Parade%202/1612200823666.jpg)

(http://img.photobucket.com/albums/v609/philj/Parade%202/1612200823777.jpg)

Almost tempted to have another go with the G lader andput the turbo on something else...

(http://img.photobucket.com/albums/v609/philj/1711200814555.jpg)

Title: Re: And again
Post by: Phil on December 23, 2008, 03:32:29 am

Haven't really done much recently, laquered the starter motor..

(http://img.photobucket.com/albums/v609/philj/Parade%202/171220082388.jpg)

And painted a couple more bits, then changed my mind :lol:

(http://img.photobucket.com/albums/v609/philj/Parade%202/2012200824444.jpg)

(http://img.photobucket.com/albums/v609/philj/Parade%202/21122008250000.jpg)