SNS Stage 5 PSD chip £60 or any offer at all.
(http://i443.photobucket.com/albums/qq157/jezza-3/IMG_0393.jpg)
Uprated organic clutch. Bought this for £200 and only did 500 miles with it on. £150 posted.
(http://i443.photobucket.com/albums/qq157/jezza-3/IMG_0045.jpg)
6 mikalor clamps £15 posted.
I'll have the strut brace mate. Pm'd
just out of query..
would a specialist be able to salvage this head?..
a hae agra engineering by me they build race engine for knockhill and done my flywheeel, head etc..
has this head any chance of being good as normal .. ?
il have the oil pump. will pm you tonight.
Quotewould a specialist be able to salvage this head?.
are you serious!?!?
Quote from: djtez on June 27, 2011, 10:58:44 AM
would a specialist be able to salvage this head?..
(http://4.bp.blogspot.com/-q8Ixi2XUjWk/TanAbUrVbpI/AAAAAAAAABk/y3Leh1DfIqw/s1600/wiz.gif)
well yes.. otherwise a wouldnt of asked the bloody question?
ive seen some horrid bottom ends and they've been sleeved and used in races only weeks later..
am asking is there some sort of alluminium welding and repair work that can be carried out..
OK calm down! My answer to the questions is "no".
sorry a never meant my post to sound harsh hayesey ?
being scottish and from fife has its downsides.
well after phoneing my mate at Agra specialist he wants a photo and reckons it could be done but said it might not be cost effective..
also i ask this because
http://www.tcstangs.com/forum/showthread.php?t=109052&page=2
also
http://www.youtube.com/watch?v=JBkgJNEStxo&feature=player_embedded
...so you see my question wasn't a radical or stupid out the blue... it was a genuine question. :)
PM's replied to.
Youngprodigys- oil pump may have sold already but i do have another one that covered 108k and worked fine. If you want that one i can sell it for £20 as it has done more miles.
Also found another standard supercharger elbow. And i looked again and i possibly another one that had been ported by PSD.
£15 for standard one £20 for psd one.
**Updated**
Quote from: djtez on June 27, 2011, 10:58:44 AM
just out of query..
would a specialist be able to salvage this head?..
a hae agra engineering by me they build race engine for knockhill and done my flywheeel, head etc..
has this head any chance of being good as normal .. ?
agra spray metaled my charger shaft and do thing for my work too. they are good.
the head being alu could be welded since the seats are pressed in. but this might not be cost effective.
sorry but i see am too late with my answer lads.
ah! this was kinda the answer i was exspecting the first time :)
since i thought the level of professionalism was high on this forum
Good old Agra Engineering still on the go eh! I ran a de-tuned Imp engine of theirs for yonks. Bombproof!
yes sure is, i use them quite frequent. cant fault them, nothing better standing for an hour chatting about cars and details of engines :)!
Quote from: djtez on June 27, 2011, 05:37:03 PM
sorry a never meant my post to sound harsh hayesey ?
being scottish and from fife has its downsides.
well after phoneing my mate at Agra specialist he wants a photo and reckons it could be done but said it might not be cost effective..
also i ask this because
http://www.tcstangs.com/forum/showthread.php?t=109052&page=2
also
http://www.youtube.com/watch?v=JBkgJNEStxo&feature=player_embedded
...so you see my question wasn't a radical or stupid out the blue... it was a genuine question. :)
Vid is gid. :)
Hi
Can i please buy the strut brace.
Dunx
ahhh bugger - i think il leave it then mate, didnt want to get a high miler on the 1W but a not so high would have been alright, bugdet building ya see. no worries mate
Haha no worries. I can get them new from vw for £115 i think if you wanted a new one?
Head has gone and strut brace sold.
Open to offers people. Need this all gone as need funds for engine that's being rebuilt.
You ain't replied to pm? ..
ill take the psd ported charger pipe if u still gt it , wats ur paypal..?
Quote from: zeemanG40 on July 03, 2011, 04:55:45 PM
ill take the psd ported charger pipe if u still gt it , wats ur paypal..?
My names zeeman and i'm a dickhead i probably dont own a g40 in fact i've probably never seen one in the flesh can i buy everything on the forum hope you come to the polo show so i can poke you in the eye
Charger pipe is here still. PM's replied to.
Brakes, psd elbow and headlight cover now sold.
Starting to list this stuff on ebay. Pulley already on.
Items that havent sold are on ebay now.
Vernier gone.
throttle body sold. Items back on ebay for a lot less. Need these gone or they will get scrapped this time.
post the ebay links then
Ok,
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200634108549&ssPageName=STRK:MESELX:IT#ht_500wt_1156
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200634108639&ssPageName=STRK:MESELX:IT#ht_500wt_1156
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200634108710&ssPageName=STRK:MESELX:IT#ht_500wt_1156
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200634108768&ssPageName=STRK:MESELX:IT#ht_500wt_1156
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200634108834&ssPageName=STRK:MESELX:IT#ht_500wt_1156
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200634108997&ssPageName=STRK:MESELX:IT#ht_500wt_1156
Clamps and chip are still available.
Block is now bare with crank. Got the sump still and oil pump.
Have you got the throttle body?
All thats left is:
PSD Chip
6 Mikalor clamps
1 charger elbow
Organic clutch
block with crank
oil pump
sump, this just got powder coated and cause it was late doing it never got put on my engine. Cost £20 and would like £50 posted.
Are sumps that hard to come by then? :D
Ha ha that was a mistake! Will make that £50 instead of £500!
Clutch, Chip and clamps are only things left now.
what setup is the chip for ?
G60 injectors, 65mm pulley, induction kit.