« previous next »
Pages: [1]   Go Down

Author Topic: cams  (Read 2001 times)

Offline chrism

  • Members
  • *****
  • Posts: 7
cams
« on: August 05, 2013, 01:20:27 pm »
iv just go a piper VPHBP285H i was just whudring do i need a Verna pulley to run this cam and i went to fit it and it just looks up on the cam so carnt tern engen over to check timeing have i mest up is this to big a cam or am i doing sumert rong hers a link with more info on cam  http://www.pipercams.co.uk/pipercams/www/product_print.php?pid=VPHBP285H

hop u all can understand me and my spelling thanks
Logged

Offline Phil

  • Members
  • *****
  • Posts: 395
Re: cams
« Reply #1 on: August 11, 2013, 07:33:23 pm »
It shouldn't be locking up at those specs. Check the timing again.

 Are you running this cam on a turbo engine?
Logged

Offline Andy

  • Traders
  • *****
  • Posts: 1503
Re: cams
« Reply #2 on: August 11, 2013, 08:14:20 pm »
The VPHBP300H needs the tappet buckets relieving slightly otherwise it fouls on the head, but the VPHBP285H should be okay if timed up properly.
Logged

Offline chrism

  • Members
  • *****
  • Posts: 7
Re: cams
« Reply #3 on: August 28, 2013, 12:55:30 pm »
no its on a full blended g charger iv put stander cam back in and runs fine i was after the G40BP270H cam but cum across VPHBP285H cheep is it relly for turbo set ups
Logged
Pages: [1]   Go Up
« previous next »