Tooth belts GATES POWERGRIP HTD

[chase_g40]

Hi found a company that do a smaller belt size that some people may need as I struggled to fit a 29tooth belt on mine cause there was way too much slack on the belt even with the charger and alternator at full tension my tooth belt conversion is by bar-Motorsport and they supplied this belt the belt you should be looking for is a Gates PowerGripHTD 1000-8m 20mm wide and is 125 teeth rather than 129 or 130 which I found from other places the belt cost about £14 do not breaking the bank either

Here is the website:

http://www.beelineengineering.com/acatalog/Timing_Belts_Powergrip_HTD.html

[Justin14100]

Powergrip is a good belt too, the Powergrip GT2 / GT3 are the best belts around but I think only come in 1040mm.