Oil Coolers...how big is yours?

[gofasterpinch]

Just doing some shopping for the project and need to acquire an oil cooler.

I'm running a fairly tweaked AFH on bodies and other bits.

i was thinking of either a 10 or 13 row, 235mm wide to sit next to the rad, where the stock intercooler would be on a G40.

does this sound suitable?

[Alex]

13 row, 235mm on mine

[Etches]

Mines a 16 row

[gofasterpinch]

do either of you have a gauge fitted and know what kind of oil temps you're getting with them?

[Alex]

I have a gauge fitted, but it's not wired up to the sender.

[Etches]

Mines currently sat in my outhouse , 13 row is plenty mate . Its going to be cool enough with one of these , 13 row is what psd used ?

[cheys03]

13 row, 235mm. Temp. measured at the sump, never gets above 120* with a turbo.

[Andy]

13 row, 235mm. Temp. measured at the sump, never gets above 120* with a turbo.

Same, except I got mine to 135°C on track. Radiator is still stock CL though and I'd got the water temps so high the water overtemp buzzer was coming on.

[gofasterpinch]

ah that's good, considering you guys with the turbo applications should be seeing higher oil temps a 13 row should be ideal for mine.

is a 235 the right width to fit in that gap?