Author Topic: rev counter wiring  (Read 2403 times)

Offline poloandyb

  • Members
  • *****
  • Posts: 127
rev counter wiring
« on: February 01, 2012, 05:37:38 pm »
hi all, when i had my 1.4 gt engine in my van i was using a tim rev counter.now iv put a g40 engine in i'd like to use the same revcounter,on the gt i ran it off the ignition module but iv tryed on the gee and it dosent work from there..dose anyone know where i splice into the loom to get a pulse for the rev counter?????

hope someone can help

cheers andy

Offline ereeiz

  • Members
  • *****
  • Posts: 972
Re: rev counter wiring
« Reply #1 on: February 01, 2012, 09:56:27 pm »
It's in the wiring diagram in the haynes manual, I went through it 5-6 years ago and can't remember what I did. Tried looking in there?

Offline grungeisdead

  • Members
  • *****
  • Posts: 822
Re: rev counter wiring
« Reply #2 on: February 02, 2012, 12:46:48 pm »
connect the rev counter wire to the negative take off on the coil (its under a cap by the plug, 8mm nut

Offline youngprodigys

  • Members
  • *****
  • Posts: 545
  • G 3URO
Re: rev counter wiring
« Reply #3 on: February 22, 2012, 11:39:35 pm »
rev pulse from ecu is the red/black from the yellow plug in the ecu loom