G40 Engine Conversion Breaking

[dekerf1996]

Whats the loom like?

Any pictures of it?

Is it the full engine bay loom, or just the engine loom?

Cheers

[cheddarcheese]

its just the ecu loom the most important bit and the looms mint with fresh loom tape !!! but i do have the other loom available!

[cheddarcheese]

bump

[Jake G 4 0]

What's the oil cooler like buddy? Does it have a thermostatic sandwich plate??

[cheddarcheese]

Got other people also interested in the oil cooler mate first and not had a chance to remove it yet to check but will let every one know when i do.

[Jake G 4 0]

No worries bud.

[syncro]

Hi,

How much for the bottom end only without head?

Where are you based?

[cheddarcheese]

Hi,

How much for the bottom end only without head?

Where are you based?

Not splitting the engine its to good for that.

[cheddarcheese]

Update i have now fixed my daily car so have transport again and will be able to get to my unit to collect and remove parts from the g40 and get any pictures! pm me people ty

[Breaderzz]

do you still have most of the bit for a full conversion?

cheers, Liam

[ec20]

is the full conversion still for sale?

[cheddarcheese]

it was never a full conversion to start with but this is whats available


PY G40 engine block, head, cam, rocker cover, complete bottom end, Dizzy. 95k £500
G40 inlet manifold £40
G40 throttle body £70
G40 injectors and fuel rail £40
G40 loom with new loom tape £100
G40 exhaust manifold with snapped stud/bolt £offers
G40 plastic boost pipe and hoses £offers
G40 dials £40
Engine Oil Cooler and sandwich plate £75
PSD Full Blend G40 charger needs full rebuild £200

missing ecu, gearbox, co pot sender, blue and black water temp senser, spark plugs,ht leads, supercharger belts most of the parts are serviceable parts and available new accept the ecu and gearbox give me an offer if your interested?

It will cost about 300quid more to make a full conversion and then get a fresh supercharger rebuild and you will have one very solid motor i would rather not sell and just store the engine but could do with the money but im in no rush to sell i paid 1300 for this conversion back 4/5 years ago from an older guy who was building a 1400cc motor back when psd was still running.

[AlexG40]

What's the spec of the oil cooler matey?

[642855659]

Hi, i`m after the plastic boost pipe, and the 2 rubber ones of you have them, how much do you want inc postage

[russtyshackleford]

have u still got dials mate and is that £40 posted?