oil pressure

[RyanC]

how many switches r there is it just the 2 in the head? and what should the pressure be i got on the 2 in the head just under 1.5 bar when warmd up reving it a 2000rpm and when i start it up when its cold its about 3.5 bar is that okay? thanks

[RyanC]

i did this test coz my buzzer and light is on but it only gose on when u rev it up i unplugged both switches started it up and as soon as i rev it it dose it again ever when they are unplugged but i think the pressure is ok it not high at all, i think its the clocks?

[RyanC]

Anyone?

[hayesey]

Those pressures are fine. Are you saying it does this when you have the sensors unplugged?! They need to be plugged in!

[RyanC]

yh when there are pluged in and i rev it to about 3000 it starts bluzzing and if i unplug then it dose the same as soon as i rev it up it beeps again also when u drive it and put the clutch down it stop beeping then when u bring revs up in the next gear it beep again it really strange

[hayesey]

Might need a new sensor, or a break in the wiring

[RyanC]

okay thanks alot for your help