Author Topic: oil pressure  (Read 1489 times)

Offline RyanC

  • Members
  • *****
  • Posts: 372
oil pressure
« on: January 21, 2012, 06:29:02 pm »
how many switches r there is it just the 2 in the head? and what should the pressure be i got on the 2 in the head just under 1.5 bar when warmd up reving it a 2000rpm and when i start it up when its cold its about 3.5 bar is that okay? thanks

Offline RyanC

  • Members
  • *****
  • Posts: 372
Re: oil pressure
« Reply #1 on: January 21, 2012, 06:40:36 pm »
i did this test coz my buzzer and light is on but it only gose on when u rev it up i unplugged both switches started it up and as soon as i rev it it dose it again ever when they are unplugged but i think the pressure is ok it not high at all, i think its the clocks?

Offline RyanC

  • Members
  • *****
  • Posts: 372
Re: oil pressure
« Reply #2 on: January 22, 2012, 01:52:27 pm »
Anyone?

Offline hayesey

  • Administrators
  • *****
  • Posts: 5824
  • The CV joint killer
    • ClubG40
Re: oil pressure
« Reply #3 on: January 22, 2012, 04:29:36 pm »
Those pressures are fine. Are you saying it does this when you have the sensors unplugged?! They need to be plugged in!

Offline RyanC

  • Members
  • *****
  • Posts: 372
Re: oil pressure
« Reply #4 on: January 22, 2012, 06:35:42 pm »
yh when there are pluged in and i rev it to about 3000 it starts bluzzing and if i unplug then it dose the same as soon as i rev it up it beeps again also when u drive it and put the clutch down it stop beeping then when u bring revs up in the next gear it beep again it really strange

Offline hayesey

  • Administrators
  • *****
  • Posts: 5824
  • The CV joint killer
    • ClubG40
Re: oil pressure
« Reply #5 on: January 22, 2012, 06:41:24 pm »
Might need a new sensor, or a break in the wiring

Offline RyanC

  • Members
  • *****
  • Posts: 372
Re: oil pressure
« Reply #6 on: January 22, 2012, 07:09:36 pm »
okay thanks alot for your help :)