sump removel

[jake_smith]

Just searched but couldnt find anything.

Does the gearbox have to be removed before you can take the sump off? I hope so as ive got all bolts off and it moves aboutttt 4mm and wont go anywhere after that.

The side closest to the box its catching on the flywheel when you pull the sump down. So im assuming you pull the other side down 1st then move it across to clear the flywheel. But the side furthest away from the box wont come down anymore than 2mm.

Am i missing something?

Sorry about all the threads latley, just trying to get it sorted liakkke lol

[Alexiskayak_7]

No, you don't take the gearbox off...
Have you removed a black plate that has a 11mm bolt?
After you unbolt this, you'll see a couple of alen sump bolts...

[jake_smith]

cant see no 11m bolts anywhere :/

Ive just taken out whole of 16ish or whatever 10mm bolts?

Aint got nothing to do with the fact i have a gt box is it?

[Alexiskayak_7]

That plate...

[jake_smith]

oppps missed a bolt   ahah

Anyyywayyy , bad news i think. Theres play in the conrods SIDE TO SIDE to up and down. Bottom end gone?