banjo bolt sizes for charger oil feed hoses

[goosyganger]

Can anyone tell me the size of the banjo bolt and the thread pitch for the bolts that hold the oil feed hose to the charger on the top and into the t-peice on the head. And the same info for the bolts that hold the hose to the charger underneith and goes into the block? Thanks

[PeteG40]

top one to t-peice and the one to oil return  is m10x1 but they are only cheap from vw anyway

[goosyganger]

yeah im sure they arent much its just the lads down at my local engineering place that do aaaaawesome gear said if I can get them the size and thread they would definatly have the bolts, I would rather put money in their pockets then stinky VW that half the time scratch their heads when you ask for a part or tell them you have a g40. Maybe thats just the guys at my local one lol.

Anyways, thanks for the reply.

[Dan]

Make sure you get the right length. I would get them for VW. Get the part numbers to go there if it helps.

[goosyganger]

The smaller bolt is m8. I managed to get the big ones from my local place coz vw has them on back order. But got the m8 from vw. Thanks for the help.

[xrrich]

Has anyone got parts numbers for the banjo bolts. just sheared mine. whey 

Cheers
Rich

[Jezza-7]

I got spare ones.

[PeteG40]

I can now supply new banjos with washers!