Author Topic: Cylinder Head Machining  (Read 132 times)

Offline Alexis

  • Members
  • *****
  • Posts: 54
Cylinder Head Machining
« on: October 24, 2021, 07:24:14 pm »
Just diagnosed my idling problems as low compression on cylinder 4.

Leak down test shows 25% of pressure leaking out of exhaust valve.

I've never had a head machined. I was thinking new valves, head skimmed and I'll put a new T belt and waterpump on. Anything else worth while doing while it's out?

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4026
  • Housewives heart throb
Re: Cylinder Head Machining
« Reply #1 on: October 25, 2021, 08:31:23 pm »
Perhaps not need new valves, just them machining to the seats.

I'd get new valve guides and stem seals too and worth doing the cam seal.