Author Topic: oil seals and springs fail  (Read 4061 times)

Offline G_CoNeCtioN

  • Members
  • *****
  • Posts: 8
oil seals and springs fail
« on: August 23, 2014, 12:49:42 pm »
Hi i have a problem with this charger always its a oil seal or a spring who pops out.
I already change 3 main shafts so whats rong?the oil seals are the good ones viton high pressure.
Can you guys help me?

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4036
  • Housewives heart throb
Re: oil seals and springs fail
« Reply #1 on: August 23, 2014, 02:32:48 pm »
Check yr oil pressure.  Breather blocked,  drain blocked etc

Offline G_CoNeCtioN

  • Members
  • *****
  • Posts: 8
Re: oil seals and springs fail
« Reply #2 on: August 23, 2014, 02:48:41 pm »
Its all alright maybe its the bearing from scroll?

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4036
  • Housewives heart throb
Re: oil seals and springs fail
« Reply #3 on: August 27, 2014, 11:07:34 am »
if the oil seal pops out - do you bond them in?

Offline G_CoNeCtioN

  • Members
  • *****
  • Posts: 8
Re: oil seals and springs fail
« Reply #4 on: August 31, 2014, 02:56:54 am »
Yes

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4036
  • Housewives heart throb
Re: oil seals and springs fail
« Reply #5 on: August 31, 2014, 09:59:25 am »
In extreme cases the scroll centre can wear so seals pop.  So.it needs sleaving.


However its normally excess oil pressure that causes them to pop
.
 Either blocked shaft or oil drain on the block or in the charger pulley side or a blocked breather or kinked breathee hose

Offline paulg40

  • Members
  • *****
  • Posts: 61
Re: oil seals and springs fail
« Reply #6 on: September 03, 2014, 12:12:29 am »
When I took one of my chargers apart I found lots of metal stuck in the main shaft oil way, it was the left overs of an old Oil Seal spring, it had broken up and I reckon once all was out (it took me ages to fish it all out!) I had enough to build the pressure up on one side of the charger seals.

this was a charger I bought second hand so I never ran it like this but I dare say it couldn't have been efficient running like this.

So if you have the charger apart check the oil ways inside the main shaft!