PSD Full Blend Charger For Sale

dan1300r · July 09, 2013, 05:09:05 PM

As in title. Got to be worth £250. My dyno print outs using this are on here. Fitted with 65mm steel ribbed pulley. Ran on standalone oil pump with nice thin machine oil. No idea of mileage but worked well with no smoke or nasty noises. Selling as went down the turbo route a while ago. ECU chipped to match if required £80. All prices plus P+P. Paypal accepted. Can chuck in a 65mm V belt pulley for £10 if required.

Lewis · July 09, 2013, 08:09:01 PM

Where are you based pal?

Very interested!

dan1300r · July 09, 2013, 11:30:13 PM

Workington, Cumbria. I'm sure folks ask the £400 mark for these but I'm wanting to shift a few items and want a result..

dan1300r · July 09, 2013, 11:32:50 PM

Quote from: dan1300r on July 09, 2013, 05:09:05 PM
As in title. Got to be worth £250. My dyno print outs using this are on here. Fitted with 65mm steel ribbed pulley. Ran on standalone oil pump with nice thin machine oil. No idea of mileage but worked well with no smoke or nasty noises. Selling as went down the turbo route a while ago. ECU chipped to match if required £80. All prices plus P+P. Paypal accepted. Can chuck in a 65mm V belt pulley for £10 if required.

I also have a brand new 58mm v belt pulley here too £20 if anyone fancies blowing it up quicker!

Jezza-7 · July 10, 2013, 12:16:36 PM

Quote from: dan1300r on July 09, 2013, 11:30:13 PM
sure folks ask the £400 mark for these

When they have been recently serviced and known mileage they go for that price.

Lewis · July 10, 2013, 02:14:32 PM

When was the last service? Would you be willing to post?

dan1300r · July 10, 2013, 08:14:12 PM

I would post but will need to find out the cost. Probably £25ish at a guess.

dan1300r · July 10, 2013, 08:25:32 PM

Quote from: Jezza-7 on July 10, 2013, 12:16:36 PM
Quote from: dan1300r on July 09, 2013, 11:30:13 PM
sure folks ask the £400 mark for these

When they have been recently serviced and known mileage they go for that price.

Was this essential? It's arse pocket money

dan1300r · July 10, 2013, 08:26:15 PM

Quote from: dan1300r on July 09, 2013, 05:09:05 PM
As in title. Got to be worth £250. My dyno print outs using this are on here. Fitted with 65mm steel ribbed pulley. Ran on standalone oil pump with nice thin machine oil. No idea of mileage but worked well with no smoke or nasty noises. Selling as went down the turbo route a while ago. ECU chipped to match if required £80. All prices plus P+P. Paypal accepted. Can chuck in a 65mm V belt pulley for £10 if required.

Lewis · July 10, 2013, 11:39:39 PM

Do you know when it was last serviced?

dan1300r · July 11, 2013, 07:43:34 PM

Hello Lewis. It came off the G I broke up, the car had 165,000 miles on it and as the old saying goes 'it was regularly serviced by myself' aka the last owner. He reckoned at 155,000 miles so in essence it has done 10,000 since it's last service. I have no reason to doubt him plus it took my polo up to 163hp with 175lb of torque, didn't pass any smoke at the exhaust and sounded sweet. We all know these things are time bombs anyway but I don't have any reason to think this is about to die any time soon. Here's the link to my thread with this lader fitted, see the g lader dyno run on this page http://www.polog40.co.uk/forum/index.php?topic=9438.0

Regards Dan

Lewis · July 13, 2013, 11:05:22 AM

I wrote my car off yesterday mate so I have bigger things to worry about at the mo.

Sorry to mess you around mate

dan1300r · August 26, 2013, 03:36:36 PM

Charger now £200 if anyone wants it. Will do a deal if anyone needs the chipped ecu to suit it.

gaz g40 · August 26, 2013, 05:31:40 PM

Will you post?

chris2911 · August 26, 2013, 09:16:29 PM

£250 with ecu

can u give me a rough postcode to collect