Author Topic: Blanking plate fell off :S need advice on re threading  (Read 21480 times)

Offline G40-lex

  • Members
  • *****
  • Posts: 35
Blanking plate fell off :S need advice on re threading
« on: July 03, 2013, 11:53:10 am »
HOW DO CHAPS

Heard a small rattle develop one night and before i knew, something fell off my car and twanged on the underside, driven about 30 miles since and only just realized im missing my blanking plate! The last time i gave it a spray i was worried that the bolts felt alittle loose and it wasn't tightening fully!

Now i need a new blanking plate but what can i do about getting the bolts to tighten?? thinking it will probably need to be re threaded? not to sure the best way to it.

Anybody else had to do this at any point? if so how you go about doing it?

I wont be driving anywhere anytime soon but should i be worried about the miles ive done while not having a blanking plate?

cheers

Lex
« Last Edit: July 03, 2013, 12:03:58 pm by G40-lex »

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: Blanking plate fell off :S need advice on re threading
« Reply #1 on: July 03, 2013, 03:24:31 pm »
Bit of loctite?

Offline G40-lex

  • Members
  • *****
  • Posts: 35
Re: Blanking plate fell off :S need advice on re threading
« Reply #2 on: July 03, 2013, 07:58:34 pm »
Bit of loctite?


thats the plan so far, making a new plate right now and gonna wack some loctite down it

Im guessing when i spray every 1000miles, its ok to spray it through the air filter side? just as that far easier to get off

Offline Jezza-7

  • Members
  • *****
  • Posts: 3832
Re: Blanking plate fell off :S need advice on re threading
« Reply #3 on: July 03, 2013, 09:44:31 pm »
either side is fine, prob better that side as thats were normal air flow is

Offline G40-lex

  • Members
  • *****
  • Posts: 35
Re: Blanking plate fell off :S need advice on re threading
« Reply #4 on: July 04, 2013, 02:16:49 am »
Looks like i need re tap one thread, looks pretty mashed, just been surgically picking metal flakes out of the hole :S

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4037
  • Housewives heart throb
Re: Blanking plate fell off :S need advice on re threading
« Reply #5 on: July 04, 2013, 06:41:40 am »
Ideally needs charger splitting and helicoiling

Offline scotsjohn

  • Members
  • *****
  • Posts: 967
  • Probably the oldest G driver in the Universe.
Re: Blanking plate fell off :S need advice on re threading
« Reply #6 on: July 04, 2013, 10:11:02 am »
Why not a little bit of chemical metal rubbed down into the remains of the threading then re-tap. The bolts aren't carrying any stress.

Offline PeteG40

  • Administrators
  • *****
  • Posts: 4037
  • Housewives heart throb
Re: Blanking plate fell off :S need advice on re threading
« Reply #7 on: July 04, 2013, 11:10:02 am »
Issue is getting any swarf in the charger

Offline scotsjohn

  • Members
  • *****
  • Posts: 967
  • Probably the oldest G driver in the Universe.
Re: Blanking plate fell off :S need advice on re threading
« Reply #8 on: July 04, 2013, 12:05:56 pm »
Parcel tape/Duct tape de ole.