had a power run on the rollers today

[Etches]

all that spec, and still standard head

I'm still on a stock head. 206bhp and 215lb/ft.

So have you had a play with emerald then andy?:

[eppo]

I had 145hp on my G40, with ccv bypass,pipercross filter, magnecor plug cables, 65 pulley and supersprint exaust..  here is the video of the test:

http://www.youtube.com/watch?v=fGoz0c1Tm1k

cheers

[Alexiskayak_7]

Very good result eppo!
Have you fitted a full supersprint exhaust and how many km does your engine have?

[eppo]

 thanks!my engine have 158.000 km, and i only have the supersprint mufler

[Alexiskayak_7]

thanks!my engine have 158.000 km, and i only have the supersprint mufler

What chip do you have?

[eppo]

i dont have any chip....the only thing i have more in engine is samco hoses... nothing more

[eppo]

I made 3 runs in this dyno

the firth run, i did with only bypass, K&N box filter ,and SS mufler, I get 123,8 hp

the second, i have bypass, pipercross air filter, and SS , I get 128,6 hp

the third run, i put magnecor plug cables and the 65 pulley, and i get 145 hp!

here is the results:

[Alexiskayak_7]

Eppo, at the 1st power run, have you had your airbox deristricted?

[eppo]

the airbox inlet air?

[Alexiskayak_7]

The inlet of the stock airbox has a restriction (the upper part), is it removed in your airbox when you did the 1st power run?

[eppo]

no , i always have stock airbox!  

people here in portugal, stay surprise with my g40 hp with few mods  

my engine is in very good shape i supoose

cheers