Club G40 Forum

Technical => Superchargers / G-Lader => Topic started by: G40BLUE on September 17, 2012, 07:45:31 am

Title: Glader service
Post by: G40BLUE on September 17, 2012, 07:45:31 am

Hello,
so my Glader is open I need to a service repair. Can someone tell me where I can Buy the Kit?. I known RPm, Bar.tek but unfortunately I don't know where to buy? some oilSeals are brown other black I don't know the differences.
Another doubt have is the Sealstrips some of them are grey or black or beige.


Thanks for your Help
Gblue

Title: Re: Glader service
Post by: PeteG40 on September 17, 2012, 09:19:48 am

check here.

http://www.polog40.co.uk/forum/index.php/topic,2824.0.html

generally brown oil seals are viton - black are nitrile (viton are more resiliant)

apex seals - beige are softer so seal better, but wear quicker (but wear the scroll/casings less)  Grey are harder so last longer but wear casings more. I use beige, but will use grey if the scroll/casings have any pitting/rough surfaces as this can were beige ones out very quickly.