Club G40 Forum

Technical => Engine and Transmission => Topic started by: gavin.starr on June 13, 2011, 03:01:04 pm

Title: Oil leak
Post by: gavin.starr on June 13, 2011, 03:01:04 pm

I have an oil leak coming from the small domed unit down the back of the engine block. Is this an easy fix or not.

Title: Re: Oil leak
Post by: Puncharado on June 13, 2011, 04:56:13 pm

That's the crankcase breather pod, there is a mesh filter inside which often gets blocked. Access to remove it isn't the best, and it's quite a tight fit in the block, especially a new one. You'll need to prise it away from the block without damaging the mating surface. You can clean the mesh, some people remove it altogether, some re-fit the old pod and use gasket sealant, some fit a new pod without sealant.