Club G40 Forum
Technical => Engine and Transmission => Topic started by: youngprodigys on May 22, 2011, 02:17:08 pm
-
hiya guys- how hot does your rocker cover get after say, 10minutes on. no thrashing just a puttle up the bypass at 50/60mph.
its been so long since i drive my G that i cant remember. my rocker cover is scalding after 10minutes. i have an oil cooler fitted amd the oil pressure is good.
is it worth fitting a breather to the rocker cover?
-
They get pretty hot tbh. I wouldn't want to lick it put it that way.
-
i know they get hot - i just dont know how hot - if i have a problem i kinda wana sort it lol.
-
Will probably be at least 70'C mate
-
Burnt my arm on mine yesterday.
Then again after my piston melted and that was ridiculously hot!
-
pretty hot then, wonder if theres any way to cool it down a bit? hmmmm might weld some fins to my spare that ive got for my 1W turbo
-
Well i thought about this and the only thing i can think of is that if your running a charger with the boost mod, you can get a pipe to fit from the throttle body to the rocker cover so its always putting air through.
Or you could fit a different rocker cover and have a breather going off it to let some heat escape.
-
i welded that up! il just live with it i reckon, i have a spare rocker so i may experiment i dunno yet
-
I seem to remeber a very rare rocker on a g60 that had lots of fins on it to act as a heat sinc was in a past issue of pvw I'll dig it out later if you want ?
-
its on kennys rallye, the proper mint black one with crackle black engine bay iirc. i know which you mean and that is exactly what im thinking.
-
thought i remembered it from some where. looked realy nice you could proably re-create something like that especialy if your handy with a tig welder
-
anyone got a shot of that?