Club G40 Forum
Technical => Engine and Transmission => Topic started by: vwmk3jon on February 22, 2011, 11:46:04 pm
-
Got a 268/268 cam (i believe) for my turbo conversion and a vernier pulley BUT i dont have a woodruff key :( Where can i get one from? Can i use the one on my standard cam & pulley? Hard to remove (heard it can be!). No good with tools so cant really make one.
cheers ;)
Jon
-
stock cam pulley key is internal to the pulley I think....
think you'll have to get one made
-
Yeah it should come with the vernier pulley.
-
Dang :(
I didnt get one with the vernier pulley. Its one of those purple ebay jobbies. Will have to find someone to make me one.
-
If you send me a photo of the slot in your pulley and some di
dimensions I'll knock one up for you if you want I made one for my cat cams one in the end as they send one without. Pm me with photo and some dimensions
-
Machine shops, re-wind shops and motor factors are all a good bet. My local machine shop keeps a boxfull of all sorts of sizes under the counter.
-
If you send me a photo of the slot in your pulley and some di
dimensions I'll knock one up for you if you want I made one for my cat cams one in the end as they send one without. Pm me with photo and some dimensions
Cheers chap :)
Ill get some photos uploaded when I get my stupid pc working.