-
51mm Throttle Body Conversions are now available.
(http://i797.photobucket.com/albums/yy258/Justin14100/IMG_4343.jpg)
What this service gives is an enlarged throttle body on an exchange basis for your old unit.
The 51mm throttle body is enlarged from 45mm; this allows more air to pass through the unit with less restriction.
(http://i797.photobucket.com/albums/yy258/Justin14100/IMG_4348.jpg)
What the unit consists of are the following: Opening up the main body to 51mm; an elliptical and chamfered butterfly to suit the unit, use of cap head screws on the butterfly to reduce restriction; ported and matched top elbow to further reduce restrictions and slightly improve flow; sealant used between the top elbow and the main unit to prevent boost leaks. We now use chemical metal to strengthen the weakest wall of the throttle body, which is behind the cover for the wide open throttle sensor so luckily it doesn't degrade the look of the throttle body.
(http://i797.photobucket.com/albums/yy258/Justin14100/IMG_4345.jpg)
These enlargements will change how the throttle feels on your car, its more sensitive, more aggressive with an increase of power. I've really enjoyed having one on my daily, feels more torquey off boost low end and mid range which is always nice.
Much time has been spent making sure sure the butterfly gives a perfect seal and the quality of the OEM is retained.
Prices are as £150 exchange, once payment and your original Throttle Body is with us yours will be sent out. If you car is a daily or you don't want it off the road for a day or two PM me and we may be able to sort something out. Any questions or specific needs please PM me.
(http://i797.photobucket.com/albums/yy258/Justin14100/IMG_4336.jpg)
-
Justin, you have pm.
-
I will take the other one only after the main body though. Please pm your payment details and price for main body only thanks.
-
Just a heads up for anyone thats interested, I will have 3 throttle bodies available the week starting the 6th of February. I have changed the description a little too as we no longer sand blast them, the dirt would contaminate the tiny needle bearings that rest on the butterfly shaft so it would make it feel a little 'gritty' and not smooth.
Regards,
Justin.
PM me for details.
-
One currently available guys.
-
pm
-
New batch arriving next week with brass butterflies instead of aluminium ones, they will still come sealed with black silicone gasket but if you want a 51mm gasket please enquire here:
http://www.polog40.co.uk/forum/index.php/topic,8439.0.html
Send randombadger a PM and he will sort you out if you choose to run that solution.
-
pm'd
-
Pm'd address in PayPal message
-
I'm also interested in one of these Justin
-
Ok guys, the time in the machine shop is booked. This will be the last chance I will get before I leave (unless there is a special case of power urgency!
I have three throttle bodies ready to be machined, however if you send yours over for the weekend I will turn them around and post on Monday or Tuesday so I can get as many done as possible.
Please PM me for further details.
-
Due to high demand some more will be being made this weekend. So there should be a few available in the first part of September
PM me for details
Thanks!
-
Just had one of these delivered in the post from Justin and i must say i am most impressed with the quality of the machining/work. Very fast turn around from him... spot on thanks mate...
-
Fairly tempted but I don't have a spare TB..
-
Final batch finished, I have a few available. PM me for details, I would prefer these to be exchanged before I leave on the 18th but can make other arrangements if necessary.
-
just pm'd you mate for you details
-
May be getting a spare tb asap!! so I should be taking one..
-
Excellent service Justin, mines on and made a big-BIG difference low down.
THANKS!
-
Sold out. Any enquiries please send me a PM.
-
Hi mate, need your payment details and I'll get monies to you!
-
One final body in stock for exchange
-
justin are you still making these?
-
Just incase he doesn't reply, justin is living in canada and i think he's been out there for nearly 2 years now.
-
so a no then hahahaa
-
Well, I'm having a few months of home time so I may as well get back into bad habits! If a few people are interest in these again I can do a good ol' batch of them!
-
welcome home mate! Canada looked ace, well jealous.
-
Canada best place on earth after Yorkshire.
What's the lead time on this, and price still £150
Cheers
-
Hey, price should be the same, unless royal mail is more expensive, could be 155 ;) Not home yet, will be in November time,. Just in time for some G40 christmas presents! ha. Canada has been excellent.
-
100% interested in one of these. Standard throttle body ready and waiting :)
-
When will the next batch of these be ready?
-
Yo mate,
I arrive tomorrow. Probably by mid next week.
Cheers.
Q
-
Definitely want one of these.
Can you please PM me when you get them in stock.
Thanks
Matty
-
Making a batch of 6 next week. I may be out of action again as I might be heading to Tenerife for the winter. I can get 6 done in the mean time though. PM me for details on how to get one.
-
Got 3 available right now, PM for details
-
Just 2 left of the current batch, PM for details
-
Alright mate, i have bought a tb that i don’t need. Only needed the t-piece. You want it to make into a 51mm?
-
No thanks mate, i have a bunch of standard ones. i doubt i will do any more 51mms now. Just the two left then i'll clear up my standard ones.
Thanks anyway pal, hope you're well.
-
One 51mm left in stock. PM for details.
-
Interested! PM sent.
-
hi mate, do you have any of these left?
thanks james