Club G40 Forum

Technical => Turbochargers => Topic started by: DKnight on January 29, 2011, 10:39:10 am

Title: Throttle Sensor wiring
Post by: DKnight on January 29, 2011, 10:39:10 am

im just sorting the throttle sensor on my conversion, and wondered if anyone knows what needs to go to where in relation to the wires!

cheers

Title: Re: Throttle Sensor wiring
Post by: PeteG40 on January 29, 2011, 01:32:28 pm

principle is this, that the full throttle switch only works above a certain psi of boost - say 6 so that you dont overfuel while the turbo spools.

Therefore you have to wire this switch in between the throttle body full throttle switch (which is the white plug on throttle body)

Title: Re: Throttle Sensor wiring
Post by: POLO.P on February 04, 2011, 09:30:42 pm

is it necessary to remove the micro switch that is located inside the throttle body? I had seen it all stripped out on an earlier post on here.

Title: Re: Throttle Sensor wiring
Post by: hayesey on February 04, 2011, 09:39:57 pm

I assume you are in no rush, I'll sort it out for you next time I'm round.  It'll be fcool.