Club G40 Forum
Club G40 => General Car Chat => Topic started by: Robga on September 09, 2008, 08:09:01 pm
-
Hi
Due to non payment im re-opening this group buy.
These poly engine mounts will fit Mk1-3 and there are 0 sets left (1 set = 3 mounts).
Cost is £62 inc P&P.
Here's a link to the original group buy http://www.polog40.co.uk/forum/index.php?topic=428&page=1
Im not going to close the buy untill the money is in my account as i dont want to be waiting around again, so if you pay by cheque and someone beats you by paying though a transfer then UNLUCKY i'll send you a cheque back if it eventually did clear or your cheque will be shreaded!
Please can i have
User Name - Real Name
List so far
H866MPR - Robert Gardiner - CLUB G40 - PAID
G-spot - Jason Richards - CLUB G40 - PAID
Breadman - Richard Hayward - CLUB G40 - PAID
tjp lawson - Ty Lawson - CLUB G40 - PAID
Dekerf1996 - Mark Jetten - CLUB G40 - PAID
Danny Lee - Daniel Lee - CLUB POLO - PAID
G40_Jez - Jeremy Reeves - CLUB POLO - PAID
Tav - Mark McTavish - CLUB G40 - PAID
rml2711- Peter Malin - CLUB G40 - PAID
Raw - Andy Skelton - CLUB G40 - PAID
Karl CLCoupe - Karl - CLUB POLO - PAID
TommyK - Thomas King - CLUB G40 - PAID
JCRG40 - James Roberts - CLUB G40 - PAID
Cheers
Rob
-
[quote pid=4058 author=H866MPR date=1220987341]Hi
Due to non payment im re-opening this group buy.
These poly engine mounts will fit Mk1-3 and there are 5 sets left.
Cost is £62 inc P&P.
Here's a link to the original group buy http://www.polog40.co.uk/forum/index.php?topic=428&page=1
Im not going to close the buy untill the money is in my account as i dont want to be waiting around again, so if you pay by cheque and someone beats you by paying though a transfer then UNLUCKY i'll send you a cheque back if it eventually did clear or your cheque will be shreaded!
Please can i have
User Name - Real Name
List so far
H866MPR - Robert Gardiner - CLUB G40 - PAID
G-spot - Jason Richards - CLUB G40 - PAID
Breadman - Richard Hayward - CLUB G40 - PAID
tjp lawson - Ty Lawson - CLUB G40 - PAID
Dekerf1996 - Mark Jetten - CLUB G40 - PAID
Danny Lee - Daniel Lee - CLUB POLO - PAID
G40_Jez - Jeremy Reeves - CLUB POLO - PAID
Tav - Mark McTavish - CLUB G40 - PAID
Cheers
Rob[/quote]I'm on the reserve list,does this mean I might be lucky? If you can let me know your address and who to write it out to,I'll post you a cheque if I may for the £62.Thanks,Peter Malin....rml2711
-
[quote pid=4082 author=rml2711 date=1221077615][quote pid=4058 author=H866MPR date=1220987341]Hi
Due to non payment im re-opening this group buy.
These poly engine mounts will fit Mk1-3 and there are 5 sets left.
Cost is £62 inc P&P.
Here's a link to the original group buy http://www.polog40.co.uk/forum/index.php?topic=428&page=1
Im not going to close the buy untill the money is in my account as i dont want to be waiting around again, so if you pay by cheque and someone beats you by paying though a transfer then UNLUCKY i'll send you a cheque back if it eventually did clear or your cheque will be shreaded!
Please can i have
User Name - Real Name
List so far
H866MPR - Robert Gardiner - CLUB G40 - PAID
G-spot - Jason Richards - CLUB G40 - PAID
Breadman - Richard Hayward - CLUB G40 - PAID
tjp lawson - Ty Lawson - CLUB G40 - PAID
Dekerf1996 - Mark Jetten - CLUB G40 - PAID
Danny Lee - Daniel Lee - CLUB POLO - PAID
G40_Jez - Jeremy Reeves - CLUB POLO - PAID
Tav - Mark McTavish - CLUB G40 - PAID
Cheers
Rob[/quote]I'm on the reserve list,does this mean I might be lucky? If you can let me know your address and who to write it out to,I'll post you a cheque if I may for the £62.Thanks,Peter Malin....rml2711[/quote]
Hi Pete
I did pm you as you are first sub! Did you not get it? I'll pm you again with my details.
Cheers
Rob
-
Rob, I can't get my PM to work so I've posted here. I can't afford the mounts now. Sorry, I'm sure somebody will have them. If they haven't sold by pay-day (25/09/08) I'll have them.
Thanks, Andy.
-
how hard are these may I ask? i mean are they solid nylon or are they inbetween that and normal rubbers???
-
[quote pid=4246 author=peteg40 date=1221810712]how hard are these may I ask? i mean are they solid nylon or are they inbetween that and normal rubbers???[/quote]
They are not solid nylon, just firmer than normal O.E. rubber ones. Half way house you might say.
-
Yep they are firmer than the OE rubbers, but still no where near as solid as the nylon bushes.
-
[quote pid=4245 author=Raw date=1221809352]Rob, I can't get my PM to work so I've posted here. I can't afford the mounts now. Sorry, I'm sure somebody will have them. If they haven't sold by pay-day (25/09/08) I'll have them.
Thanks, Andy.[/quote]
There are still 4 sets left and its nearly the 25th! ^_^
-
[quote pid=4246 author=peteg40 date=1221810712]how hard are these may I ask? i mean are they solid nylon or are they inbetween that and normal rubbers???[/quote]
Yeah what they say! :D
-
[quote pid=4325 author=H866MPR date=1222098325][quote pid=4245 author=Raw date=1221809352]Rob, I can't get my PM to work so I've posted here. I can't afford the mounts now. Sorry, I'm sure somebody will have them. If they haven't sold by pay-day (25/09/08) I'll have them.
Thanks, Andy.[/quote]
There are still 4 sets left and its nearly the 25th! ^_^[/quote]
Bagsy a set of 3! I'll forward payment as agreed previously on the 25th!
-
[quote pid=4366 author=Raw date=1222198636][quote pid=4325 author=H866MPR date=1222098325][quote pid=4245 author=Raw date=1221809352]Rob, I can't get my PM to work so I've posted here. I can't afford the mounts now. Sorry, I'm sure somebody will have them. If they haven't sold by pay-day (25/09/08) I'll have them.
Thanks, Andy.[/quote]
There are still 4 sets left and its nearly the 25th! ^_^[/quote]
Bagsy a set of 3! I'll forward payment as agreed previously on the 25th![/quote]
Wikid mate :D
Looking forward to only having to find owners for 3 more sets!
-
Ive had enough of waiting now so rather than only getting 30 made up and asking everyone for extra pounds im going to put the money in myself and hopefully sell them after. If anyone who has paid wants spares then i will sell them at cost price otherwise they will go on ebay!
Cheers
Rob
-
Replied on the original thread, and sent payment. My apologies for going AWOL.
-
List so far
H866MPR - Robert Gardiner - CLUB G40 - PAID
G-spot - Jason Richards - CLUB G40 - PAID
Breadman - Richard Hayward - CLUB G40 - PAID
tjp lawson - Ty Lawson - CLUB G40 - PAID
Dekerf1996 - Mark Jetten - CLUB G40 - PAID
Danny Lee - Daniel Lee - CLUB POLO - PAID
G40_Jez - Jeremy Reeves - CLUB POLO - PAID
Tav - Mark McTavish - CLUB G40 - PAID
TommyK - Tom King - Club G40 - PAID (3 mounts)
-
Put me down!
JAy
-
These still available? If so im interested, can send a cheque off tomorrow.
Let me know, cheers...
-
Put me down!
JAy
I will PM you with my details but you will have to pay fast as ive already sent cheque off or I will offer them to Gary!
Cheers mate
Rob
-
Can i have an update on these please?
Have they all been sold or are we waiting for a few more sets to go before they go into production?
I have already ordered and paid for one set, but if its a being delayed on more being sold, then i might take another set
Cheers
-
Can i have an update on these please?
Have they all been sold or are we waiting for a few more sets to go before they go into production?
I have already ordered and paid for one set, but if its a being delayed on more being sold, then i might take another set
Cheers
They are all sold now.
Hopefully should be about 2 weeks for them be to made.
Cheers
Rob
-
Yey,
Look forward to recieving them, with any luck I'll have a subframe to fit around the same time :-\ ???
-
If their`s 3 going spare then i`d like a set. Regards, Fred.
email- fredmoorestrong@msn.com
-
If their`s 3 going spare then i`d like a set. Regards, Fred.
email- fredmoorestrong@msn.com
Sorry mate but they are all sold.
Rob
-
All the bushes have been cast and will get sent to me sometime this week! :)
-
I recieved a nice big bag full of poly bushes this morning! :)
(http://img.photobucket.com/albums/v416/866rob/40PolyEngineMounts.jpg)
(http://img.photobucket.com/albums/v416/866rob/SinglePolyEngineMount.jpg)
For people who havent given me their addresses please could you do so and the people who have ill try and get them posted out on saturday.
Cheers
Rob
-
Received mine this morning, and they don't feel any firmer than the standard one's???? Or is the difference felt once they're fitted??
Also there is no steel work with them, so I'll have to get an old set to make up the full mount, cos I'm not prepared to cut up perfectly good OEM G40 mounts(less than2yr old), to fit these and find that there either no better or possibly worse >:( >:(
Sorry to grizzle, but its a Monday morning, its raining and the missus as told me to sort the living room out :P
-
Received mine this morning, and they don't feel any firmer than the standard one's???? Or is the difference felt once they're fitted??
Also there is no steel work with them, so I'll have to get an old set to make up the full mount, cos I'm not prepared to cut up perfectly good OEM G40 mounts(less than2yr old), to fit these and find that there either no better or possibly worse >:( >:(
Sorry to grizzle, but its a Monday morning, its raining and the missus as told me to sort the living room out :P
I thought that about the hardness too untill i actually felt the upper gearbox bush already on the car (couldnt squash the front engine bush due to the wait of the engine) and these are definitely harder but not stupidly hard.
Im sure the old bush can be pressed out of the metal bracket the same way you would press the new one in with soapy water or some spray grease. Ive not tried yet but thats how im going to attempt it.
Sorry to hear your monday hasnt started to well!
Rob
-
I too recieved mine today.
Thanks for sorting out the group buy Rob. It's a lot of fannying about, from the initial setting up/organising, chasing those that don't pay up and particularly the packaging and posting of 'em, it's much appreciated mate. :)
Cheers,
Richard.
-
Sorry was a bit menstrual earlier, anyway just finished a late shift, and in better mood, was thinking about it this afternoon, and the poly bushes on my susupension felt squishy, but perform rather well, so I guess my hand squeezing test probably ain't the best guide!!
I have to apologise too, I should have opened the earleir post like 'breadman' has and say nice one for sorting out the group buy as its not the easiest thing to manage when you have to deal with grumpyy old gits like me.
I have a spare mount on the shelf somewhere, so I'll have a float to replace the them one at a time. I beleive my subframe in due soon so all in all I'll have a bit to do soon!
-
Did you send them all out on the same day or in different batches? Not recieved anything in the post?
-
Breadman - Thank you for the thank you!
It was a little bit of a mess around when people say they are in the group buy and then dont send any payment or ever get back in contact with me but there was enough good people here that we got there in the end!
G-spot - No problem mate, glad you are happier now! :)
-
Did you send them all out on the same day or in different batches? Not recieved anything in the post?
You scared me for a moment there Tav but ive just checked who got their bushes sent out last saturday and you didnt as you aint given me an address yet! :D
Sort me an address out by tomorrow morning and il get them posted to you!
Cheers
-
Did I send you my address details? I really can't remember!!
Let me know please,Peter Malin
-
I still need addresses for;
dekerf1996
Tav
rml2711
Raw
JCRG40
Cheers
Rob
-
A note of thank's to Rob for seeing this group-buy through.I'm certain there must be times, when he questioned his sanity and wondered if it was worth the aggro. But,I am delighted with the finished product and can't wait to get them fitted.
Thank you Rob. Peter.
-
A note of thank's to Rob for seeing this group-buy through.I'm certain there must be times, when he questioned his sanity and wondered if it was worth the aggro. But,I am delighted with the finished product and can't wait to get them fitted.
Thank you Rob. Peter.
Cheers Peter for your kind words!
It wernt too bad really, only real problems were caused by myself in keeping my office document up to date with whos paid and whos given me addresses ect! :)
Dont think I could handel working in a shop or office!