Club G40 Forum
Technical => Superchargers / G-Lader => Topic started by: Jezza-7 on December 16, 2010, 04:16:49 pm
-
Anyone know what the torque of this pulley is?
Cant seem to find it in the haynes.
-
I have just swapped oner lader's this weekend and i still cant seem to find anything on the torque required for the pulley.
Now it says it haynes that the aux belt is 20nm. It also says somewhere that the aux belt is it g-lader belt. I have done the pulley to 20nm and used some loctite stud lock.
What does everyone on here torque it up to?
-
i just hold it with a chain whip and nip it up with a spanner... not that tight
-
oh ok, 20nm sounds about right then
cheers pete!