Club G40 Forum

Technical => Turbochargers => Topic started by: breadman on July 17, 2010, 10:42:03 pm

Title: Front mount intercooler size
Post by: breadman on July 17, 2010, 10:42:03 pm

Just like to ask those with a K03 turbo which size intercooler you are using? I'm more interested in the actual core size rather than the overall length etc.
Some of the PSD ones (like Yoof's install) I've seen on here seem to be virtually the full width between the chassis legs and quite high. The one I've got has a core size of 500 long x 240 high with nicely flowed end tanks. Anyone care to measure theirs :P :D for me?
Thanks in advance,
Richard.

Title: Re: Front mount intercooler size
Post by: breadman on July 20, 2010, 08:23:23 pm

Can anyone help? Just an approx measurement would be good just so I can get an idea.
Thanks,
Richard.

Title: Re: Front mount intercooler size
Post by: Andy on July 20, 2010, 08:42:54 pm

Mine's (very roughly!) about 700x450x40.

Title: Re: Front mount intercooler size
Post by: breadman on July 20, 2010, 08:49:30 pm

Quote from: Andy on July 20, 2010, 08:42:54 pm

Mine's (very roughly!) about 700x450x40.

Blimey, there was me worrying that mine was a bit big, 500x240x65 core size.
Thanks Andy,
Cheers,
Richard.

Title: Re: Front mount intercooler size
Post by: Robin on July 23, 2010, 06:16:19 pm

mine is the same as Andy's

Title: Re: Front mount intercooler size
Post by: Andy on July 23, 2010, 10:41:58 pm

That's not what Tracey said! ;)

Title: Re: Front mount intercooler size
Post by: gofaster100 on March 21, 2011, 07:13:27 pm

just the cooling surface area measures:-  L 55cm x H 14cm x D 7.5cm

Title: Re: Front mount intercooler size
Post by: vwmk3jon on March 22, 2011, 04:38:40 pm

Mines a forge item. No idea on size at present but it's wider than the AWT item currently on the car but not as tall. Will go get the tape measure out later when I get 2 secs.