Club G40 Forum

Technical => Engine and Transmission => Topic started by: Keppel on June 15, 2010, 08:33:12 pm

Title: 085 Gearbox shift mechanism removal...
Post by: Keppel on June 15, 2010, 08:33:12 pm

i'm in the middle of an 085 gearbox stripdown and rebuild.

I have the box split, but I cant get the inpuyt and output shafts out of the casing because the shif mechanism is in the way.

I don't know how to remove it, The shaft that the mechanism is mounted to looks like it is threaded or pressed into the casing, there is a female m7 thread in the end of the shaft visible from the outside of the casing.

is there a special extraction tool, or will a slide hammer work to remove it, or do i need to lock a nut and bolt against is and unscrew it.

any advice would be much appreciated.

cheers

Title: Re: 085 Gearbox shift mechanism removal...
Post by: hayesey on June 15, 2010, 08:43:48 pm

yeah there's an aluminium dowel pressed into the casing which holds the bar in the middle of the shift mechanism.  It has a tapped hole in it so you can screw a screw in and use a slide hammer.

Title: Re: 085 Gearbox shift mechanism removal...
Post by: Keppel on June 15, 2010, 08:45:36 pm

awesome,

Thankyou indeed!