Club G40 Forum

Technical => Superchargers / G-Lader => Topic started by: g40chris on April 28, 2009, 08:47:33 pm

Title: belt length for 65mm pulley
Post by: g40chris on April 28, 2009, 08:47:33 pm

what length do i need for my 65mm pulley?

just went to fit it and the 1015mm belts seem to be to long

Title: Re: belt length for 65mm pulley
Post by: PeteG40 on April 28, 2009, 08:56:02 pm

stock vw belts fit a 65s i used in the past

Title: Re: belt length for 65mm pulley
Post by: g40chris on April 28, 2009, 09:22:04 pm

i will go check again now

cheers

Title: Re: belt length for 65mm pulley
Post by: g40chris on April 28, 2009, 09:42:13 pm

DOH!

all sorted now, just me being a dumb arse

wasnt pulling the charger enough

Title: Re: belt length for 65mm pulley
Post by: jonboy on April 29, 2009, 07:57:23 am

got any tips, cos i cant get mine tight either using std belts.  there appears to be a gap in the adjustment slot to suggest it will move more, but the charger seems to be getting stuck against something, possibly the exhaust manifold.  at  the moment the belts will start to scream by 5k

Title: Re: belt length for 65mm pulley
Post by: PeteG40 on April 29, 2009, 08:23:18 am

it might be the intercooler pipe stopping it moving!