Club G40 Forum
Club G40 => Photos and videos => Ongoing Projects => Topic started by: GTG40 on February 13, 2009, 12:35:26 pm
-
It first started off in life as a 1991 GT
Bought it of my brother for £300
Managed to souce a G40 engine fitted that and run for about a year untill the supercharger decided it wanted to break so found it an excuse to fit a K03 turbo.
Got alot of it done so far
Parts still need fitting:
Bigger intercooler (Needs plumbing in)
Rest of Exhaust (downpipe back)
Dump valve
Injectors
Chip
Cam
Water feed/return to turbo
Oil Feed
Oil return
Oil Cooler
+ few other bits
Some pictures
(http://i718.photobucket.com/albums/ww187/stealberts/G40%20Turbo/Image037.jpg)
(http://i718.photobucket.com/albums/ww187/stealberts/G40%20Turbo/Image038.jpg)
(http://i718.photobucket.com/albums/ww187/stealberts/G40%20Turbo/Image040.jpg)
-
Now i've fitted the dumpvalve and also the intercooler do you reakon its big enough ;D
Had to move the radiator to the left about an inch so i could fit the boost pipes through
(http://i718.photobucket.com/albums/ww187/stealberts/G40%20Turbo/Image042.jpg)
-
none of the pics are working mate. Just seeing a photobucket message saying that they have been moved or deleted.
-
none of the pics are working mate. Just seeing a photobucket message saying that they have been moved or deleted.
Sorted now thanks.
-
dont be runnig too much boost through that interwarmer!
-
dont be runnig too much boost through that interwarmer!
Whys that? Going to run about a bar i think
-
plastic end caps blow of around just over a bar, just dont want that as it might cause over boost an pull your turbo to bits.
-
plastic end caps blow of around just over a bar, just dont want that as it might cause over boost an pull your turbo to bits.
Plastic end caps, what u mean??? on the intercooler??